{"title":"Kiln Chain","description":"\u003cp\u003eKiln chain for rotary cement and lime kilns — Spira-Loop, ring-type in carbon, alloy and stainless, and proof coil, with the shackles and hangers to hang it. Sold on surface area, because the chain is a heat exchanger.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFor heat transfer only — not suitable for lifting.\u003c\/strong\u003e\u003c\/p\u003e","products":[{"product_id":"spira-loop-kiln-chain","title":"Spira-Loop Loop Kiln Chain","description":"\u003ch2\u003eSpira-Loop Loop Kiln Chain\u003c\/h2\u003e\n\u003cp\u003eThe original overlapped circular chain, and the highest heat-transfer area in the range. The long overlapping section maximises surface area while letting slurry pass through the links.\u003c\/p\u003e\n\u003ch3\u003eRead this first\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFor heat transfer only — not suitable for lifting.\u003c\/strong\u003e Kiln chain\nhangs in a kiln as a heat exchanger and as a scraper. It is not rated for load,\nit carries no working load limit, and it must never be used for lifting or\nrigging. The catalogue page says so on every family and so do we.\u003c\/p\u003e\n\u003cp\u003eThe round-link design with a long overlapping section gives the\ngreatest surface area per foot of anything here. The doubled section acts as an\neccentric, so links rotate — which spreads wear evenly, keeps the chain flexible\nand makes it self-cleaning and non-kinking.\u003c\/p\u003e\n\u003cp\u003eSupplied in ready-to-install lengths, needing no enlarged end links.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAgainst the alternatives at the same nominal size\u003c\/strong\u003e, on the\nfigures in the table below: about \u003cstrong\u003e44% more area per foot than\nring-type\u003c\/strong\u003e, and \u003cstrong\u003e54–59% more than proof coil\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch3\u003eSizes and surface area\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003eLink dimensions\u003c\/th\u003e\n\u003cth\u003eLinks \/ ft\u003c\/th\u003e\n\u003cth\u003eWeight \/ ft\u003c\/th\u003e\n\u003cth\u003eArea \/ link\u003c\/th\u003e\n\u003cth\u003eArea \/ ft\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e5\/8″\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2-1\/2″\u003c\/td\u003e\n\u003ctd\u003e4.8\u003c\/td\u003e\n\u003ctd\u003e6.44 lb\u003c\/td\u003e\n\u003ctd\u003e30.06 in²\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e.98 ft²\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e3\/4″\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3″\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003ctd\u003e9.12 lb\u003c\/td\u003e\n\u003ctd\u003e43.07 in²\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e1.18 ft²\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e1″\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3″\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003ctd\u003e17.75 lb\u003c\/td\u003e\n\u003ctd\u003e59.21 in²\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e1.64 ft²\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eMaterial: Type K (Carroll Alloy), AISI 8620, carbon steels. Surface area is the number that matters —\nthe chain is a heat exchanger, so area per foot decides how much chain the kiln\nneeds, and area per pound decides what that area costs you.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003eOptions\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eHardness\u003c\/th\u003e\n\u003ctd\u003eHeat treated to \u003cstrong\u003e400+ Brinell\u003c\/strong\u003e, or carburized to \u003cstrong\u003e500+ Brinell\u003c\/strong\u003e for greater wear resistance\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eLengths\u003c\/th\u003e\n\u003ctd\u003eReady-to-install lengths, or continuous\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTolerance\u003c\/th\u003e\n\u003ctd\u003eWeights and dimensions approximate, ±4%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eWeights are calculated at 0.283 lb\/in³ for carbon and alloy steel, and\n0.29 lb\/in³ for stainless.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003eFitting it\u003c\/h3\u003e\n\u003cp\u003eChain hangs from a \u003ca href=\"\/products\/kiln-chain-hangers\"\u003ehanger\u003c\/a\u003e through a\n\u003ca href=\"\/products\/kiln-chain-shackle\"\u003eshackle\u003c\/a\u003e. Both are quoted separately.\nThe shackle is pinned and locked with a plate: hang the chain on the shackle,\nposition it over the hanger, push the pin through both, place the locking plate\nin its recess and straighten it with a few hammer blows.\u003c\/p\u003e\n\u003cp\u003eTell us the kiln, the zone and the duty and we will quote it.\u003c\/p\u003e","brand":"Dibblee","offers":[{"title":"5\/8″ — 2-1\/2″ — .98 ft²\/ft","offer_id":50201322389781,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true},{"title":"3\/4″ — 3″ — 1.18 ft²\/ft","offer_id":50201322422549,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true},{"title":"1″ — 3″ — 1.64 ft²\/ft","offer_id":50201322455317,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true}]},{"product_id":"ring-type-kiln-chain","title":"Ring-Type Kiln Chain — Carbon \u0026 Alloy Steel","description":"\u003ch2\u003eRing-Type Kiln Chain — Carbon \u0026amp; Alloy Steel\u003c\/h2\u003e\n\u003cp\u003eFlash-welded circular links. More area and weight than proof coil, and cheaper per square foot of surface area.\u003c\/p\u003e\n\u003ch3\u003eRead this first\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFor heat transfer only — not suitable for lifting.\u003c\/strong\u003e Kiln chain\nhangs in a kiln as a heat exchanger and as a scraper. It is not rated for load,\nit carries no working load limit, and it must never be used for lifting or\nrigging. The catalogue page says so on every family and so do we.\u003c\/p\u003e\n\u003cp\u003eThe circular shape lets slurry and work-load pass through the links,\nand the increased area intensifies heat transfer. Circular links rotate, which\nmeans flexibility, minimum kinking, self-cleaning and even wear.\u003c\/p\u003e\n\u003cp\u003eFlash welding gives a controlled, high-quality weld free of foreign material.\u003c\/p\u003e\n\u003cp\u003eGreater area and weight also increase the scraping action on the kiln wall,\nwhich helps prevent mud rings forming. \u003cstrong\u003eLess expensive than proof coil\nper square foot of surface area\u003c\/strong\u003e, and fewer pieces are needed for the\nsame area — which lowers installation cost as well.\u003c\/p\u003e\n\u003ch3\u003eSizes and surface area\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003eLink dimensions\u003c\/th\u003e\n\u003cth\u003eLinks \/ ft\u003c\/th\u003e\n\u003cth\u003eWeight \/ ft\u003c\/th\u003e\n\u003cth\u003eArea \/ link\u003c\/th\u003e\n\u003cth\u003eArea \/ ft\u003c\/th\u003e\n\u003cth\u003eArea \/ lb\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e5\/8″\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e21\/32 x 2-1\/2″\u003c\/td\u003e\n\u003ctd\u003e4.80\u003c\/td\u003e\n\u003ctd\u003e4.56 lb\u003c\/td\u003e\n\u003ctd\u003e20.42 in²\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e.681 ft²\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e21.70 in²\/lb\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e3\/4″\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e25\/32 x 3″\u003c\/td\u003e\n\u003ctd\u003e4.00\u003c\/td\u003e\n\u003ctd\u003e6.45 lb\u003c\/td\u003e\n\u003ctd\u003e29.12 in²\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e.810 ft²\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e18.30 in²\/lb\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e7\/8″\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e29\/32 x 3″\u003c\/td\u003e\n\u003ctd\u003e4.00\u003c\/td\u003e\n\u003ctd\u003e8.96 lb\u003c\/td\u003e\n\u003ctd\u003e34.82 in²\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e.97 ft²\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e15.07 in²\/lb\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e1″\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1-1\/32 x 3″\u003c\/td\u003e\n\u003ctd\u003e4.00\u003c\/td\u003e\n\u003ctd\u003e11.99 lb\u003c\/td\u003e\n\u003ctd\u003e41.00 in²\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e1.14 ft²\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e14.00 in²\/lb\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e1″\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1-1\/32 x 3-1\/2″\u003c\/td\u003e\n\u003ctd\u003e3.43\u003c\/td\u003e\n\u003ctd\u003e11.55 lb\u003c\/td\u003e\n\u003ctd\u003e46.07 in²\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e1.10 ft²\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e13.90 in²\/lb\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e1″\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1-1\/32 x 3-9\/16″\u003c\/td\u003e\n\u003ctd\u003e3.37\u003c\/td\u003e\n\u003ctd\u003e11.81 lb\u003c\/td\u003e\n\u003ctd\u003e46.70 in²\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e1.10 ft²\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e14.00 in²\/lb\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e1-1\/8″\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1-1\/8 x 3-1\/2″\u003c\/td\u003e\n\u003ctd\u003e3.43\u003c\/td\u003e\n\u003ctd\u003e14.04 lb\u003c\/td\u003e\n\u003ctd\u003e51.30 in²\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e1.23 ft²\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e13.00 in²\/lb\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e1-1\/4″\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1-1\/4 x 4″\u003c\/td\u003e\n\u003ctd\u003e3.00\u003c\/td\u003e\n\u003ctd\u003e17.19 lb\u003c\/td\u003e\n\u003ctd\u003e64.83 in²\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e1.35 ft²\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e11.00 in²\/lb\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eMaterial: C1008, C1022, C1038, 8620. Surface area is the number that matters —\nthe chain is a heat exchanger, so area per foot decides how much chain the kiln\nneeds, and area per pound decides what that area costs you.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003eOptions\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eHardness\u003c\/th\u003e\n\u003ctd\u003eHeat treated to \u003cstrong\u003e400+ Brinell\u003c\/strong\u003e, or carburized to \u003cstrong\u003e500+ Brinell\u003c\/strong\u003e for greater wear resistance\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eLengths\u003c\/th\u003e\n\u003ctd\u003eReady-to-install lengths, or continuous\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTolerance\u003c\/th\u003e\n\u003ctd\u003eWeights and dimensions approximate, ±4%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eWeights are calculated at 0.283 lb\/in³ for carbon and alloy steel, and\n0.29 lb\/in³ for stainless.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003eFitting it\u003c\/h3\u003e\n\u003cp\u003eChain hangs from a \u003ca href=\"\/products\/kiln-chain-hangers\"\u003ehanger\u003c\/a\u003e through a\n\u003ca href=\"\/products\/kiln-chain-shackle\"\u003eshackle\u003c\/a\u003e. Both are quoted separately.\nThe shackle is pinned and locked with a plate: hang the chain on the shackle,\nposition it over the hanger, push the pin through both, place the locking plate\nin its recess and straighten it with a few hammer blows.\u003c\/p\u003e\n\u003cp\u003eTell us the kiln, the zone and the duty and we will quote it.\u003c\/p\u003e","brand":"Dibblee","offers":[{"title":"5\/8″ — 21\/32 x 2-1\/2″ — .681 ft²\/ft","offer_id":50201323340053,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true},{"title":"3\/4″ — 25\/32 x 3″ — .810 ft²\/ft","offer_id":50201323372821,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true},{"title":"7\/8″ — 29\/32 x 3″ — .97 ft²\/ft","offer_id":50201323405589,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true},{"title":"1″ — 1-1\/32 x 3″ — 1.14 ft²\/ft","offer_id":50201323438357,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true},{"title":"1″ — 1-1\/32 x 3-1\/2″ — 1.10 ft²\/ft","offer_id":50201323471125,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true},{"title":"1″ — 1-1\/32 x 3-9\/16″ — 1.10 ft²\/ft","offer_id":50201323503893,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true},{"title":"1-1\/8″ — 1-1\/8 x 3-1\/2″ — 1.23 ft²\/ft","offer_id":50201323536661,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true},{"title":"1-1\/4″ — 1-1\/4 x 4″ — 1.35 ft²\/ft","offer_id":50201323569429,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true}]},{"product_id":"tay-loop-stainless-kiln-chain","title":"Tay-Loop Ring-Type Kiln Chain — Stainless Steel","description":"\u003ch2\u003eTay-Loop Ring-Type Kiln Chain — Stainless Steel\u003c\/h2\u003e\n\u003cp\u003eThe ring-type chain in stainless, for the hot end where carbon and alloy steel will not last.\u003c\/p\u003e\n\u003ch3\u003eRead this first\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFor heat transfer only — not suitable for lifting.\u003c\/strong\u003e Kiln chain\nhangs in a kiln as a heat exchanger and as a scraper. It is not rated for load,\nit carries no working load limit, and it must never be used for lifting or\nrigging. The catalogue page says so on every family and so do we.\u003c\/p\u003e\n\u003cp\u003eSame flash-welded circular link as the carbon and alloy ring chain,\nin \u003cstrong\u003eAISI 304 or 309 stainless\u003c\/strong\u003e. Other stainless grades on request.\u003c\/p\u003e\n\u003cp\u003eNote the material dimension is exact rather than nominal — a 5\/8″ Tay-Loop is\n5\/8″ of stainless, where the carbon equivalent is 21\/32″. Weights are calculated\nat 0.29 lb\/in³ for stainless against 0.283 for carbon.\u003c\/p\u003e\n\u003ch3\u003eSizes and surface area\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003eLink dimensions\u003c\/th\u003e\n\u003cth\u003eLinks \/ ft\u003c\/th\u003e\n\u003cth\u003eWeight \/ ft\u003c\/th\u003e\n\u003cth\u003eArea \/ link\u003c\/th\u003e\n\u003cth\u003eArea \/ ft\u003c\/th\u003e\n\u003cth\u003eArea \/ lb\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e5\/8″\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5\/8 Exact x 2-1\/2″\u003c\/td\u003e\n\u003ctd\u003e4.80\u003c\/td\u003e\n\u003ctd\u003e4.19 lb\u003c\/td\u003e\n\u003ctd\u003e19.26 in²\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e.642 ft²\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e22.30 in²\/lb\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e3\/4″\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3\/4 Exact x 3″\u003c\/td\u003e\n\u003ctd\u003e4.00\u003c\/td\u003e\n\u003ctd\u003e6.04 lb\u003c\/td\u003e\n\u003ctd\u003e27.73 in²\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e.771 ft²\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e18.60 in²\/lb\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e7\/8″\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e7\/8 Exact x 3″\u003c\/td\u003e\n\u003ctd\u003e4.00\u003c\/td\u003e\n\u003ctd\u003e8.74 lb\u003c\/td\u003e\n\u003ctd\u003e33.46 in²\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e.93 ft²\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e15.33 in²\/lb\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e1″\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1 Exact x 3″\u003c\/td\u003e\n\u003ctd\u003e4.00\u003c\/td\u003e\n\u003ctd\u003e11.78 lb\u003c\/td\u003e\n\u003ctd\u003e39.43 in²\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e1.09 ft²\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e13.80 in²\/lb\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e1″\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1 Exact x 3-1\/2″\u003c\/td\u003e\n\u003ctd\u003e3.43\u003c\/td\u003e\n\u003ctd\u003e11.37 lb\u003c\/td\u003e\n\u003ctd\u003e44.30 in²\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e1.06 ft²\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e14.00 in²\/lb\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eMaterial: AISI 304, 309 stainless. Surface area is the number that matters —\nthe chain is a heat exchanger, so area per foot decides how much chain the kiln\nneeds, and area per pound decides what that area costs you.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003eOptions\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eHardness\u003c\/th\u003e\n\u003ctd\u003eHeat treated to \u003cstrong\u003e400+ Brinell\u003c\/strong\u003e, or carburized to \u003cstrong\u003e500+ Brinell\u003c\/strong\u003e for greater wear resistance\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eLengths\u003c\/th\u003e\n\u003ctd\u003eReady-to-install lengths, or continuous\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTolerance\u003c\/th\u003e\n\u003ctd\u003eWeights and dimensions approximate, ±4%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eWeights are calculated at 0.283 lb\/in³ for carbon and alloy steel, and\n0.29 lb\/in³ for stainless.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003eFitting it\u003c\/h3\u003e\n\u003cp\u003eChain hangs from a \u003ca href=\"\/products\/kiln-chain-hangers\"\u003ehanger\u003c\/a\u003e through a\n\u003ca href=\"\/products\/kiln-chain-shackle\"\u003eshackle\u003c\/a\u003e. Both are quoted separately.\nThe shackle is pinned and locked with a plate: hang the chain on the shackle,\nposition it over the hanger, push the pin through both, place the locking plate\nin its recess and straighten it with a few hammer blows.\u003c\/p\u003e\n\u003cp\u003eTell us the kiln, the zone and the duty and we will quote it.\u003c\/p\u003e","brand":"Dibblee","offers":[{"title":"5\/8″ — 5\/8 Exact x 2-1\/2″ — .642 ft²\/ft","offer_id":50201323831573,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true},{"title":"3\/4″ — 3\/4 Exact x 3″ — .771 ft²\/ft","offer_id":50201323864341,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true},{"title":"7\/8″ — 7\/8 Exact x 3″ — .93 ft²\/ft","offer_id":50201323897109,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true},{"title":"1″ — 1 Exact x 3″ — 1.09 ft²\/ft","offer_id":50201323929877,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true},{"title":"1″ — 1 Exact x 3-1\/2″ — 1.06 ft²\/ft","offer_id":50201323962645,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true}]},{"product_id":"proof-coil-kiln-chain","title":"Proof Coil Kiln Chain","description":"\u003ch2\u003eProof Coil Kiln Chain\u003c\/h2\u003e\n\u003cp\u003eThe economical option for kilns where severe temperatures are not encountered. Includes the 7\/8″ Cement Chain.\u003c\/p\u003e\n\u003ch3\u003eRead this first\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFor heat transfer only — not suitable for lifting.\u003c\/strong\u003e Kiln chain\nhangs in a kiln as a heat exchanger and as a scraper. It is not rated for load,\nit carries no working load limit, and it must never be used for lifting or\nrigging. The catalogue page says so on every family and so do we.\u003c\/p\u003e\n\u003cp\u003eAvailable in various alloy and high-carbon steels as well as the\npopular low-carbon steel. It does not have the heat-transfer properties of\nSpira-Loop or ring chain, but it is effective where temperatures are not\nsevere.\u003c\/p\u003e\n\u003cp\u003eFurnished in ready-to-install or continuous lengths, \u003cstrong\u003ewith or without\nend links\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThe 7\/8″ \u003cstrong\u003eCement Chain\u003c\/strong\u003e in the table is a longer, wider link\nthan the 7\/8″ proof coil — 2-1\/4″ × 4″ against 1-3\/8″ × 2-1\/2″ — so it runs\n3.00 links per foot instead of 4.80.\u003c\/p\u003e\n\u003ch3\u003eSizes and surface area\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003eLink dimensions\u003c\/th\u003e\n\u003cth\u003eLinks \/ ft\u003c\/th\u003e\n\u003cth\u003eWeight \/ ft\u003c\/th\u003e\n\u003cth\u003eArea \/ ft\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e5\/8 (21\/32) Proof Coil″\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e21\/32 x 1 x 1-7\/8″\u003c\/td\u003e\n\u003ctd\u003e6.42\u003c\/td\u003e\n\u003ctd\u003e4.10 lb\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e.636 ft²\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e3\/4 (25\/32) Proof Coil″\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e25\/32 x 1-1\/8 x 2-1\/8″\u003c\/td\u003e\n\u003ctd\u003e5.66\u003c\/td\u003e\n\u003ctd\u003e5.95 lb\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e.770 ft²\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e7\/8 (29\/32) Cement Chain″\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e29\/32 x 2-1\/4 x 4″\u003c\/td\u003e\n\u003ctd\u003e3.00\u003c\/td\u003e\n\u003ctd\u003e7.35 lb\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e.790 ft²\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e7\/8 (29\/32) Proof Coil″\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e29\/32 x 1-3\/8 x 2-1\/2″\u003c\/td\u003e\n\u003ctd\u003e4.80\u003c\/td\u003e\n\u003ctd\u003e8.11 lb\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e.893 ft²\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e1 (1-1\/32) Proof Coil″\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1-1\/32 x 1-1\/2 x 2-3\/4″\u003c\/td\u003e\n\u003ctd\u003e4.40\u003c\/td\u003e\n\u003ctd\u003e10.77 lb\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e1.030 ft²\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eMaterial: Carbon, alloy and high-carbon steel. Surface area is the number that matters —\nthe chain is a heat exchanger, so area per foot decides how much chain the kiln\nneeds, and area per pound decides what that area costs you.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003eOptions\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eHardness\u003c\/th\u003e\n\u003ctd\u003eHeat treated to \u003cstrong\u003e400+ Brinell\u003c\/strong\u003e, or carburized to \u003cstrong\u003e500+ Brinell\u003c\/strong\u003e for greater wear resistance\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eLengths\u003c\/th\u003e\n\u003ctd\u003eReady-to-install lengths, or continuous\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTolerance\u003c\/th\u003e\n\u003ctd\u003eWeights and dimensions approximate, ±4%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eWeights are calculated at 0.283 lb\/in³ for carbon and alloy steel, and\n0.29 lb\/in³ for stainless.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003eFitting it\u003c\/h3\u003e\n\u003cp\u003eChain hangs from a \u003ca href=\"\/products\/kiln-chain-hangers\"\u003ehanger\u003c\/a\u003e through a\n\u003ca href=\"\/products\/kiln-chain-shackle\"\u003eshackle\u003c\/a\u003e. Both are quoted separately.\nThe shackle is pinned and locked with a plate: hang the chain on the shackle,\nposition it over the hanger, push the pin through both, place the locking plate\nin its recess and straighten it with a few hammer blows.\u003c\/p\u003e\n\u003cp\u003eTell us the kiln, the zone and the duty and we will quote it.\u003c\/p\u003e","brand":"Dibblee","offers":[{"title":"5\/8 (21\/32) Proof Coil″ — 21\/32 x 1 x 1-7\/8″ — .636 ft²\/ft","offer_id":50201324028181,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true},{"title":"3\/4 (25\/32) Proof Coil″ — 25\/32 x 1-1\/8 x 2-1\/8″ — .770 ft²\/ft","offer_id":50201324060949,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true},{"title":"7\/8 (29\/32) Cement Chain″ — 29\/32 x 2-1\/4 x 4″ — .790 ft²\/ft","offer_id":50201324093717,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true},{"title":"7\/8 (29\/32) Proof Coil″ — 29\/32 x 1-3\/8 x 2-1\/2″ — .893 ft²\/ft","offer_id":50201324126485,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true},{"title":"1 (1-1\/32) Proof Coil″ — 1-1\/32 x 1-1\/2 x 2-3\/4″ — 1.030 ft²\/ft","offer_id":50201324159253,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true}]},{"product_id":"kiln-chain-shackle","title":"Kiln Chain Shackle — K-4034","description":"\u003ch2\u003eKiln Chain Shackle\u003c\/h2\u003e\n\u003cp\u003eCast shackle for hanging kiln chain, drawing \u003cstrong\u003eK-4034\u003c\/strong\u003e. Pinned\nand secured with a locking plate. Two forms: standard, and a wide version with\nthe J dimension opened from 1-1\/4″ to 1-1\/2″.\u003c\/p\u003e\n\u003ch3\u003eRead this first\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFor heat transfer only — not suitable for lifting.\u003c\/strong\u003e Kiln chain\nhangs in a kiln as a heat exchanger and as a scraper. It is not rated for load,\nit carries no working load limit, and it must never be used for lifting or\nrigging. The catalogue page says so on every family and so do we.\u003c\/p\u003e\n\u003ch3\u003eDimensions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eStandard\u003c\/strong\u003e\u003cbr\u003eA 15\/16″\/23.8mm  B 1 1\/8″\/28.5mm  C 3 1\/2″\/88.9mm  D 2 13\/32″\/61.1mm  E 4 1\/8″\/104.8mm  F 2″\/50.8mm  G 15\/16″\/23.8mm  H 1 1\/16″\/27mm  J 1 1\/4″\/31.8mm  K 1 3\/32″\/27.7mm  L 1″\/25.4mm\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWide (J 1-1\/2″)\u003c\/strong\u003e\u003cbr\u003eA 15\/16″\/23.8mm  B 1 1\/8″\/28.5mm  C 3 1\/2″\/88.9mm  D 2 13\/32″\/61.1mm  E 4 1\/8″\/104.8mm  F 2″\/50.8mm  G 15\/16″\/23.8mm  H 1 1\/16″\/27mm  J 1 1\/2″\/38.1mm  K 1 3\/32″\/27.7mm  L 1″\/25.4mm\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eInches and millimetres as drawn.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003col\u003e\n  \u003cli\u003eHang the chain on the shackle.\u003c\/li\u003e\n  \u003cli\u003ePosition the shackle over the hanger.\u003c\/li\u003e\n  \u003cli\u003ePush the pin through shackle and hanger.\u003c\/li\u003e\n  \u003cli\u003ePlace the locking plate in its recess.\u003c\/li\u003e\n  \u003cli\u003eStraighten the locking plate with a few hammer blows.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003ePairs with \u003ca href=\"\/products\/kiln-chain-hangers\"\u003ekiln chain hangers\u003c\/a\u003e.\u003c\/p\u003e","brand":"Dibblee","offers":[{"title":"Standard","offer_id":50201324355861,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true},{"title":"Wide (J 1-1\/2″)","offer_id":50201324388629,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true}]},{"product_id":"kiln-chain-hangers","title":"Kiln Chain Hangers","description":"\u003ch2\u003eKiln Chain Hangers\u003c\/h2\u003e\n\u003cp\u003eHangers for kiln chain in two lengths, 9-3\/8″ and 4″, plus the spiral hanger\nin heat treated steel.\u003c\/p\u003e\n\u003ch3\u003eRead this first\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFor heat transfer only — not suitable for lifting.\u003c\/strong\u003e Kiln chain\nhangs in a kiln as a heat exchanger and as a scraper. It is not rated for load,\nit carries no working load limit, and it must never be used for lifting or\nrigging. The catalogue page says so on every family and so do we.\u003c\/p\u003e\n\u003ch3\u003eDimensions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e9-3\/8″ hanger\u003c\/strong\u003e\u003cbr\u003eA 1-1\/16″\/27mm  B 1-1\/16″\/27mm  C 9-3\/8″\/238mm  D 3\/4″\/19mm  E 3-1\/2″\/89mm  F 3-3\/8″\/86mm  G ″\/mm  H ″\/mm  J ″\/mm  K ″\/mm  L ″\/mm\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e4″ hanger\u003c\/strong\u003e\u003cbr\u003eA 1-1\/16″\/27mm  B 1-1\/16″\/27mm  C 4″\/102mm  D 3\/4″\/19mm  E 3-1\/2″\/89mm  F 3-15\/16″\/100mm  G ″\/mm  H ″\/mm  J ″\/mm  K ″\/mm  L ″\/mm\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eInches and millimetres as drawn.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eSpiral hanger — K-4036\u003c\/h3\u003e\n\u003cp\u003eA curved, perforated strap in \u003cstrong\u003eheat treated steel\u003c\/strong\u003e. The\ncatalogue shows it as a photograph with no dimension table, so dimensions are\nconfirmed at quotation rather than listed here.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eThe chain hangs on a \u003ca href=\"\/products\/kiln-chain-shackle\"\u003eshackle\u003c\/a\u003e, the\nshackle sits over the hanger, and a pin through both is locked with a plate.\u003c\/p\u003e","brand":"Dibblee","offers":[{"title":"9-3\/8″ hanger","offer_id":50201324454165,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true},{"title":"4″ hanger","offer_id":50201324486933,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true},{"title":"Spiral hanger (K-4036)","offer_id":50201324519701,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true}]}],"url":"https:\/\/www.kentershackle.com\/collections\/kiln-chain.oembed","provider":"Kenter Shackles","version":"1.0","type":"link"}