{"title":"Saltwater Anodes","description":"\u003cp\u003eAnodes for salt water. Zinc to \u003cstrong\u003eASTM B418 Type I\u003c\/strong\u003e — the alloyed seawater grade whose composition meets MIL-A-18001K — and aluminium (Al-Zn-In) where longer life per kilogram matters. Never magnesium: it wastes in months in salt.\u003c\/p\u003e","products":[{"product_id":"shaft-anodes","title":"Propeller Shaft Anodes — Streamlined Collar","description":"\u003ch2\u003ePropeller Shaft Anodes — Streamlined Collar\u003c\/h2\u003e\n\u003cp\u003eTwo-piece streamlined collar anodes that clamp directly to the propeller\nshaft, in \u003cstrong\u003e31 sizes from 1\/2 in to 6 in and 25 mm to 60 mm\u003c\/strong\u003e.\nAvailable in zinc, aluminium or magnesium — tell us the water and we will quote\nthe right alloy.\u003c\/p\u003e\n\n\u003ch3\u003eImperial shafts\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eShaft diameter\u003c\/th\u003e\n\u003cth\u003eEquivalent\u003c\/th\u003e\n\u003cth\u003eTypical weight\u003c\/th\u003e\n\u003cth\u003eCommon reference\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e1\/2 in\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e12.7 mm\u003c\/td\u003e\n\u003ctd\u003e0.23 kg (0.51 lb)\u003c\/td\u003e\n\u003ctd\u003eCMX00\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e3\/4 in\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e19.05 mm\u003c\/td\u003e\n\u003ctd\u003e0.38 kg (0.84 lb)\u003c\/td\u003e\n\u003ctd\u003eCMX01\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e7\/8 in\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e22.23 mm\u003c\/td\u003e\n\u003ctd\u003e0.43 kg (0.95 lb)\u003c\/td\u003e\n\u003ctd\u003eCMX02\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e1 in\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e25.4 mm\u003c\/td\u003e\n\u003ctd\u003e0.45 kg (0.99 lb)\u003c\/td\u003e\n\u003ctd\u003eCMX03\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e1-1\/8 in\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e28.58 mm\u003c\/td\u003e\n\u003ctd\u003e0.52 kg (1.15 lb)\u003c\/td\u003e\n\u003ctd\u003eCMX04\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e1-1\/4 in\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e31.75 mm\u003c\/td\u003e\n\u003ctd\u003e0.53 kg (1.17 lb)\u003c\/td\u003e\n\u003ctd\u003eCMX05\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\n\u003cstrong\u003e1-1\/4 in\u003c\/strong\u003e (extra heavy)\u003c\/td\u003e\n\u003ctd\u003e31.75 mm\u003c\/td\u003e\n\u003ctd\u003e0.79 kg (1.74 lb)\u003c\/td\u003e\n\u003ctd\u003eCMX05A\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e1-3\/8 in\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e34.93 mm\u003c\/td\u003e\n\u003ctd\u003e0.67 kg (1.48 lb)\u003c\/td\u003e\n\u003ctd\u003eCMX06\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e1-1\/2 in\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e38.1 mm\u003c\/td\u003e\n\u003ctd\u003e0.76 kg (1.68 lb)\u003c\/td\u003e\n\u003ctd\u003eCMX07\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e1-3\/4 in\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e44.45 mm\u003c\/td\u003e\n\u003ctd\u003e1.13 kg (2.49 lb)\u003c\/td\u003e\n\u003ctd\u003eCMX08\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e2 in\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e50.8 mm\u003c\/td\u003e\n\u003ctd\u003e1.41 kg (3.11 lb)\u003c\/td\u003e\n\u003ctd\u003eCMX09\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e2-1\/4 in\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e57.15 mm\u003c\/td\u003e\n\u003ctd\u003e2.76 kg (6.08 lb)\u003c\/td\u003e\n\u003ctd\u003eCMX10\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e2-1\/2 in\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e63.5 mm\u003c\/td\u003e\n\u003ctd\u003e2.35 kg (5.18 lb)\u003c\/td\u003e\n\u003ctd\u003eCMX11\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e2-3\/4 in\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e69.85 mm\u003c\/td\u003e\n\u003ctd\u003e3.42 kg (7.54 lb)\u003c\/td\u003e\n\u003ctd\u003eCMX12\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e3 in\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e76.2 mm\u003c\/td\u003e\n\u003ctd\u003e2.97 kg (6.55 lb)\u003c\/td\u003e\n\u003ctd\u003eCMX13\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e3-1\/4 in\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e82.55 mm\u003c\/td\u003e\n\u003ctd\u003e3.27 kg (7.21 lb)\u003c\/td\u003e\n\u003ctd\u003eCMX14Z\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e3-1\/2 in\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e88.9 mm\u003c\/td\u003e\n\u003ctd\u003e4.10 kg (9.04 lb)\u003c\/td\u003e\n\u003ctd\u003eCMX15\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e4 in\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e101.6 mm\u003c\/td\u003e\n\u003ctd\u003e4.04 kg (8.91 lb)\u003c\/td\u003e\n\u003ctd\u003eCMX17\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e4-1\/2 in\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e114.3 mm\u003c\/td\u003e\n\u003ctd\u003e5.63 kg (12.41 lb)\u003c\/td\u003e\n\u003ctd\u003eCMX18\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e5 in\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e127 mm\u003c\/td\u003e\n\u003ctd\u003e4.20 kg (9.26 lb)\u003c\/td\u003e\n\u003ctd\u003eCMX19\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e5-1\/2 in\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e139.7 mm\u003c\/td\u003e\n\u003ctd\u003e7.24 kg (15.96 lb)\u003c\/td\u003e\n\u003ctd\u003eCMX20\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e6 in\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e152.4 mm\u003c\/td\u003e\n\u003ctd\u003e5.44 kg (11.99 lb)\u003c\/td\u003e\n\u003ctd\u003eCMX21\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eMetric shafts\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eShaft diameter\u003c\/th\u003e\n\u003cth\u003eEquivalent\u003c\/th\u003e\n\u003cth\u003eTypical weight\u003c\/th\u003e\n\u003cth\u003eCommon reference\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e25 mm\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.984 in\u003c\/td\u003e\n\u003ctd\u003e0.549 kg (1.21 lb)\u003c\/td\u003e\n\u003ctd\u003eCMX25\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e28 mm\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1.102 in\u003c\/td\u003e\n\u003ctd\u003e0.581 kg (1.28 lb)\u003c\/td\u003e\n\u003ctd\u003eCMX28Z\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e30 mm\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1.181 in\u003c\/td\u003e\n\u003ctd\u003e0.558 kg (1.23 lb)\u003c\/td\u003e\n\u003ctd\u003eCMX30\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e35 mm\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1.378 in\u003c\/td\u003e\n\u003ctd\u003e0.730 kg (1.61 lb)\u003c\/td\u003e\n\u003ctd\u003eCMX35\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e40 mm\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1.575 in\u003c\/td\u003e\n\u003ctd\u003e1.429 kg (3.15 lb)\u003c\/td\u003e\n\u003ctd\u003eCMX40\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e45 mm\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1.772 in\u003c\/td\u003e\n\u003ctd\u003e1.261 kg (2.78 lb)\u003c\/td\u003e\n\u003ctd\u003eCMX45\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e50 mm\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1.969 in\u003c\/td\u003e\n\u003ctd\u003e1.075 kg (2.37 lb)\u003c\/td\u003e\n\u003ctd\u003eCMX50\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e55 mm\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.165 in\u003c\/td\u003e\n\u003ctd\u003e2.735 kg (6.03 lb)\u003c\/td\u003e\n\u003ctd\u003eCMX55\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e60 mm\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.362 in\u003c\/td\u003e\n\u003ctd\u003e2.672 kg (5.89 lb)\u003c\/td\u003e\n\u003ctd\u003eCMX60\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003e\u003cem\u003eThe anode is sized by the shaft it clamps to, so each size is listed in\nthe shaft's own unit with the equivalent alongside. Measure the shaft, do not\nmeasure the old anode — a half-wasted anode reads undersize. Weights are typical\nfor the streamlined profile and are confirmed at quotation.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003eGot an old part number?\u003c\/h3\u003e\n\u003cp\u003eThe reference column above is the number most commonly cast into this style of\nanode. If the number on the one you removed is not there, send us a photo of it\nand the shaft diameter and we will match it — most aftermarket numbering\ndescends from the same US military specification, so nearly everything\ncross-references.\u003c\/p\u003e\n\n\u003ch3\u003eWhich alloy\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eZinc\u003c\/th\u003e\n\u003ctd\u003eSalt water. To \u003cstrong\u003eASTM B418 Type I\u003c\/strong\u003e — the alloyed\n    seawater grade, whose composition also meets \u003cstrong\u003eMIL-A-18001K\u003c\/strong\u003e.\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eAluminium\u003c\/th\u003e\n\u003ctd\u003eSalt and brackish water. Al-Zn-In alloy; longer life\n    per kilogram and now the default on new offshore work.\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eMagnesium\u003c\/th\u003e\n\u003ctd\u003eFresh water only, to \u003cstrong\u003eASTM B843\u003c\/strong\u003e. Never\n    use it as a saltwater substitute — it wastes in months.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003cp\u003eFor fresh water and buried service in zinc, \u003cstrong\u003eASTM B418 Type II\u003c\/strong\u003e is\nthe high-purity grade. Tell us the water and we will quote the right alloy rather\nthan assume.\u003c\/p\u003e\n\n\u003ch3\u003eSizing\u003c\/h3\u003e\n\u003cp\u003eThe material specs say nothing about how much anode to fit. That comes from\n\u003cstrong\u003eABYC E-2\u003c\/strong\u003e for boats and \u003cstrong\u003eDNV-RP-B401\u003c\/strong\u003e for ships and\noffshore structures, which size the anode mass against the area to be protected,\nthe current density and the design life.\u003c\/p\u003e\n\u003cp\u003eWhatever the calculation says, the maintenance rule is the same:\n\u003cstrong\u003ereplace at about 50% wasted.\u003c\/strong\u003e A half-wasted anode is not a\nhalf-working anode — output falls away as surface area is lost, so the last half\nprotects far less than the first.\u003c\/p\u003e\n\n\u003ch3\u003eWhat to put on your purchase order\u003c\/h3\u003e\n\u003cp\u003eZinc anodes fail by \u003cstrong\u003epassivating\u003c\/strong\u003e — they skin over and stop\nproducing current while still looking perfectly serviceable on the shaft. The\nusual cause is iron contamination, which is exactly what ASTM B418 caps at\n0.005%. Specify \u003cstrong\u003e\"to ASTM B418 Type I, mill certificate with each\nlot\"\u003c\/strong\u003e and you have something to test against. Without it, a cheap anode\nthat does nothing looks identical to a good one until the shaft is pitted.\u003c\/p\u003e\n\u003cp\u003eSee the \u003ca href=\"\/pages\/anodes\"\u003eanode selection guide\u003c\/a\u003e for the full alloy,\nsizing and specification detail.\u003c\/p\u003e","brand":"Dibblee","offers":[{"title":"1\/2 in shaft (12.7 mm)","offer_id":50199364174101,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true},{"title":"3\/4 in shaft (19.05 mm)","offer_id":50199364206869,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true},{"title":"7\/8 in shaft (22.23 mm)","offer_id":50199364239637,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true},{"title":"1 in shaft (25.4 mm)","offer_id":50199364272405,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true},{"title":"1-1\/8 in shaft (28.58 mm)","offer_id":50199364305173,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true},{"title":"1-1\/4 in shaft (31.75 mm)","offer_id":50199364337941,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true},{"title":"1-1\/4 in shaft (31.75 mm) — extra heavy","offer_id":50199364370709,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true},{"title":"1-3\/8 in shaft (34.93 mm)","offer_id":50199364403477,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true},{"title":"1-1\/2 in shaft (38.1 mm)","offer_id":50199364436245,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true},{"title":"1-3\/4 in shaft (44.45 mm)","offer_id":50199364469013,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true},{"title":"2 in shaft (50.8 mm)","offer_id":50199364501781,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true},{"title":"2-1\/4 in shaft (57.15 mm)","offer_id":50199364534549,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true},{"title":"2-1\/2 in shaft (63.5 mm)","offer_id":50199364567317,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true},{"title":"2-3\/4 in shaft (69.85 mm)","offer_id":50199364600085,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true},{"title":"3 in shaft (76.2 mm)","offer_id":50199364632853,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true},{"title":"3-1\/4 in shaft (82.55 mm)","offer_id":50199364665621,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true},{"title":"3-1\/2 in shaft (88.9 mm)","offer_id":50199364698389,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true},{"title":"4 in shaft (101.6 mm)","offer_id":50199364731157,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true},{"title":"4-1\/2 in shaft (114.3 mm)","offer_id":50199364763925,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true},{"title":"5 in shaft (127 mm)","offer_id":50199364796693,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true},{"title":"5-1\/2 in shaft (139.7 mm)","offer_id":50199364829461,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true},{"title":"6 in shaft (152.4 mm)","offer_id":50199364862229,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true},{"title":"25 mm shaft (0.984 in)","offer_id":50199364894997,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true},{"title":"28 mm shaft (1.102 in)","offer_id":50199364927765,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true},{"title":"30 mm shaft (1.181 in)","offer_id":50199364960533,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true},{"title":"35 mm shaft (1.378 in)","offer_id":50199364993301,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true},{"title":"40 mm shaft (1.575 in)","offer_id":50199365026069,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true},{"title":"45 mm shaft (1.772 in)","offer_id":50199365058837,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true},{"title":"50 mm shaft (1.969 in)","offer_id":50199365091605,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true},{"title":"55 mm shaft (2.165 in)","offer_id":50199365124373,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true},{"title":"60 mm shaft (2.362 in)","offer_id":50199365157141,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true}]},{"product_id":"zhs-anode","title":"ZHS Zinc Hull Slab Anode — Steel Straps","description":"\u003ch2\u003eZHS Zinc Hull Slab Anode — Steel Straps\u003c\/h2\u003e\n\u003cp\u003eThe standard hull anode: a flat zinc slab cast onto two steel straps that weld or bolt to the hull. The most common anode in commercial service.\u003c\/p\u003e\n\u003cp\u003eZinc sacrificial anode to \u003cstrong\u003eMIL-DTL-18001L\u003c\/strong\u003e, type\n\u003cstrong\u003eZHS\u003c\/strong\u003e — hull slab, steel straps.\nSupplied in 2 sizes. Quoted on request.\u003c\/p\u003e\n\n\u003ch3\u003eSizes and weights\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003eMinimum weight\u003c\/th\u003e\n\u003cth\u003eSpec figure\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eZHS-23\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e23 lb nominal — 9.7 kg (21.5 lb) minimum\u003c\/td\u003e\n\u003ctd\u003e\n\u003cstrong\u003e9.7 kg\u003c\/strong\u003e (21.5 lb)\u003c\/td\u003e\n\u003ctd\u003eFig 1\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eZHS-42\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e42 lb nominal — 18.6 kg (41 lb) minimum\u003c\/td\u003e\n\u003ctd\u003e\n\u003cstrong\u003e18.6 kg\u003c\/strong\u003e (41 lb)\u003c\/td\u003e\n\u003ctd\u003eFig 2\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eThese are the \u003cstrong\u003eminimum\u003c\/strong\u003e weights set by MIL-DTL-18001L, not\nthe nominal. A ZHS-23 carries a 21.5 lb minimum, not 23 lb — the number in the\ndesignation is nominal.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFull dimensions, in inches and millimetres together, are on the\nspecification drawing in the images above — that drawing is the only place those\ndimensions exist in both units.\u003c\/em\u003e\u003c\/p\u003e\n\n\n\n\u003ch3\u003eAlloy and water\u003c\/h3\u003e\n\u003cp\u003eMIL-DTL-18001L is a \u003cstrong\u003ezinc\u003c\/strong\u003e specification, supplied to\n\u003cstrong\u003eASTM B418 Type I\u003c\/strong\u003e — the alloyed seawater grade whose composition is\nwritten to meet MIL-A-18001K. That is why every supplier's datasheet claims to\n\"meet or exceed military specification\".\u003c\/p\u003e\n\u003cp\u003eFor \u003cstrong\u003efresh water\u003c\/strong\u003e zinc is the wrong alloy: use magnesium to\n\u003cstrong\u003eASTM B843\u003c\/strong\u003e, or zinc to \u003cstrong\u003eASTM B418 Type II\u003c\/strong\u003e, the\nhigh-purity grade for fresh and buried service. We cast to either — say which\nwater it is going into and we will quote the right one.\u003c\/p\u003e\n\n\u003ch3\u003eWhat to put on your purchase order\u003c\/h3\u003e\n\u003cp\u003eZinc anodes fail by \u003cstrong\u003epassivating\u003c\/strong\u003e: they skin over and stop\nproducing current while still looking perfectly serviceable. Iron contamination\nis the usual cause, which is exactly what ASTM B418 caps at 0.005%. Specify\n\u003cstrong\u003e\"to ASTM B418 Type I, mill certificate with each lot\"\u003c\/strong\u003e and you\nhave something to test against.\u003c\/p\u003e\n\n\u003ch3\u003eSizing\u003c\/h3\u003e\n\u003cp\u003eThe specification sets what the anode is, not how much of it you need. That\ncomes from \u003cstrong\u003eDNV-RP-B401\u003c\/strong\u003e for ships and offshore structures and\n\u003cstrong\u003eABYC E-2\u003c\/strong\u003e for boats. Whatever the calculation says,\n\u003cstrong\u003ereplace at about 50% wasted\u003c\/strong\u003e — output falls away as surface area\nis lost, so the last half protects far less than the first.\u003c\/p\u003e\n\n\u003ch3\u003eReading the type code\u003c\/h3\u003e\n\u003cp\u003eThese designations come from the military specification, not from any\nmanufacturer, which is why the same letters appear across every brand and why an\nold anode can nearly always be identified. Three letters: metal, then shape, then\ncore. \u003cstrong\u003eZ\u003c\/strong\u003e is zinc; \u003cstrong\u003eH\u003c\/strong\u003e hull slab,\n\u003cstrong\u003eS\u003c\/strong\u003e submarine slab, \u003cstrong\u003eT\u003c\/strong\u003e teardrop,\n\u003cstrong\u003eE\u003c\/strong\u003e fairwater slab, \u003cstrong\u003eR\u003c\/strong\u003e rod, \u003cstrong\u003eB\u003c\/strong\u003e bar,\n\u003cstrong\u003eD\u003c\/strong\u003e disc, \u003cstrong\u003eM\u003c\/strong\u003e mooring chain; then\n\u003cstrong\u003eS\u003c\/strong\u003e steel strap, \u003cstrong\u003eB\u003c\/strong\u003e brass straps,\n\u003cstrong\u003eC\u003c\/strong\u003e core strap, \u003cstrong\u003eP\u003c\/strong\u003e pipe core,\n\u003cstrong\u003eM\u003c\/strong\u003e interlocking core, \u003cstrong\u003eN\u003c\/strong\u003e no core.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"\/collections\/anodes\"\u003eSee every MIL-DTL-18001 type we supply →\u003c\/a\u003e\u003c\/p\u003e","brand":"Dibblee","offers":[{"title":"23 lb nominal — 9.7 kg (21.5 lb) minimum","offer_id":50199389634837,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true},{"title":"42 lb nominal — 18.6 kg (41 lb) minimum","offer_id":50199389667605,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0672\/4160\/7445\/files\/mil-zhs-23-zhb_6fc86465-0a6f-49ba-b7bd-0c179de03998.jpg?v=1790107981"},{"product_id":"zhb-anode","title":"ZHB Zinc Hull Slab Anode — Brass Straps","description":"\u003ch2\u003eZHB Zinc Hull Slab Anode — Brass Straps\u003c\/h2\u003e\n\u003cp\u003eThe hull slab in the brass-strap form, to the same geometry as the ZHS-23. Specified where a non-ferrous strap is wanted at the fixing.\u003c\/p\u003e\n\u003cp\u003eZinc sacrificial anode to \u003cstrong\u003eMIL-DTL-18001L\u003c\/strong\u003e, type\n\u003cstrong\u003eZHB\u003c\/strong\u003e — hull slab, brass straps.\n Quoted on request.\u003c\/p\u003e\n\n\u003ch3\u003eSizes and weights\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003eMinimum weight\u003c\/th\u003e\n\u003cth\u003eSpec figure\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eZHB-23\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e23 lb nominal — 9.7 kg (21.5 lb) minimum\u003c\/td\u003e\n\u003ctd\u003e\n\u003cstrong\u003e9.7 kg\u003c\/strong\u003e (21.5 lb)\u003c\/td\u003e\n\u003ctd\u003eFig 1\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eThese are the \u003cstrong\u003eminimum\u003c\/strong\u003e weights set by MIL-DTL-18001L, not\nthe nominal. A ZHS-23 carries a 21.5 lb minimum, not 23 lb — the number in the\ndesignation is nominal.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFull dimensions, in inches and millimetres together, are on the\nspecification drawing in the images above — that drawing is the only place those\ndimensions exist in both units.\u003c\/em\u003e\u003c\/p\u003e\n\n\n\n\u003ch3\u003eAlloy and water\u003c\/h3\u003e\n\u003cp\u003eMIL-DTL-18001L is a \u003cstrong\u003ezinc\u003c\/strong\u003e specification, supplied to\n\u003cstrong\u003eASTM B418 Type I\u003c\/strong\u003e — the alloyed seawater grade whose composition is\nwritten to meet MIL-A-18001K. That is why every supplier's datasheet claims to\n\"meet or exceed military specification\".\u003c\/p\u003e\n\u003cp\u003eFor \u003cstrong\u003efresh water\u003c\/strong\u003e zinc is the wrong alloy: use magnesium to\n\u003cstrong\u003eASTM B843\u003c\/strong\u003e, or zinc to \u003cstrong\u003eASTM B418 Type II\u003c\/strong\u003e, the\nhigh-purity grade for fresh and buried service. We cast to either — say which\nwater it is going into and we will quote the right one.\u003c\/p\u003e\n\n\u003ch3\u003eWhat to put on your purchase order\u003c\/h3\u003e\n\u003cp\u003eZinc anodes fail by \u003cstrong\u003epassivating\u003c\/strong\u003e: they skin over and stop\nproducing current while still looking perfectly serviceable. Iron contamination\nis the usual cause, which is exactly what ASTM B418 caps at 0.005%. Specify\n\u003cstrong\u003e\"to ASTM B418 Type I, mill certificate with each lot\"\u003c\/strong\u003e and you\nhave something to test against.\u003c\/p\u003e\n\n\u003ch3\u003eSizing\u003c\/h3\u003e\n\u003cp\u003eThe specification sets what the anode is, not how much of it you need. That\ncomes from \u003cstrong\u003eDNV-RP-B401\u003c\/strong\u003e for ships and offshore structures and\n\u003cstrong\u003eABYC E-2\u003c\/strong\u003e for boats. Whatever the calculation says,\n\u003cstrong\u003ereplace at about 50% wasted\u003c\/strong\u003e — output falls away as surface area\nis lost, so the last half protects far less than the first.\u003c\/p\u003e\n\n\u003ch3\u003eReading the type code\u003c\/h3\u003e\n\u003cp\u003eThese designations come from the military specification, not from any\nmanufacturer, which is why the same letters appear across every brand and why an\nold anode can nearly always be identified. Three letters: metal, then shape, then\ncore. \u003cstrong\u003eZ\u003c\/strong\u003e is zinc; \u003cstrong\u003eH\u003c\/strong\u003e hull slab,\n\u003cstrong\u003eS\u003c\/strong\u003e submarine slab, \u003cstrong\u003eT\u003c\/strong\u003e teardrop,\n\u003cstrong\u003eE\u003c\/strong\u003e fairwater slab, \u003cstrong\u003eR\u003c\/strong\u003e rod, \u003cstrong\u003eB\u003c\/strong\u003e bar,\n\u003cstrong\u003eD\u003c\/strong\u003e disc, \u003cstrong\u003eM\u003c\/strong\u003e mooring chain; then\n\u003cstrong\u003eS\u003c\/strong\u003e steel strap, \u003cstrong\u003eB\u003c\/strong\u003e brass straps,\n\u003cstrong\u003eC\u003c\/strong\u003e core strap, \u003cstrong\u003eP\u003c\/strong\u003e pipe core,\n\u003cstrong\u003eM\u003c\/strong\u003e interlocking core, \u003cstrong\u003eN\u003c\/strong\u003e no core.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"\/collections\/anodes\"\u003eSee every MIL-DTL-18001 type we supply →\u003c\/a\u003e\u003c\/p\u003e","brand":"Dibblee","offers":[{"title":"23 lb nominal — 9.7 kg (21.5 lb) minimum","offer_id":50199390257429,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0672\/4160\/7445\/files\/mil-zhs-23-zhb_b64077e0-46c9-4ddc-9753-2fe4e83b39fb.jpg?v=1790107985"},{"product_id":"zhc-anode","title":"ZHC Zinc Hull Slab Anode — Steel Core Strap","description":"\u003ch2\u003eZHC Zinc Hull Slab Anode — Steel Core Strap\u003c\/h2\u003e\n\u003cp\u003eHull slab with the steel carried through the casting as a core strap rather than as external feet. Available with a countersink for a neoprene washer.\u003c\/p\u003e\n\u003cp\u003eZinc sacrificial anode to \u003cstrong\u003eMIL-DTL-18001L\u003c\/strong\u003e, type\n\u003cstrong\u003eZHC\u003c\/strong\u003e — hull slab, steel core strap.\nSupplied in 2 sizes. Quoted on request.\u003c\/p\u003e\n\n\u003ch3\u003eSizes and weights\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003eMinimum weight\u003c\/th\u003e\n\u003cth\u003eSpec figure\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eZHC-23\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e23 lb nominal — 9.3 kg (20.4 lb) minimum\u003c\/td\u003e\n\u003ctd\u003e\n\u003cstrong\u003e9.3 kg\u003c\/strong\u003e (20.4 lb)\u003c\/td\u003e\n\u003ctd\u003eFig 8\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eZHC-42\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e42 lb nominal — 17.7 kg (39 lb) minimum\u003c\/td\u003e\n\u003ctd\u003e\n\u003cstrong\u003e17.7 kg\u003c\/strong\u003e (39 lb)\u003c\/td\u003e\n\u003ctd\u003eFig 10\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eThese are the \u003cstrong\u003eminimum\u003c\/strong\u003e weights set by MIL-DTL-18001L, not\nthe nominal. A ZHS-23 carries a 21.5 lb minimum, not 23 lb — the number in the\ndesignation is nominal.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFull dimensions, in inches and millimetres together, are on the\nspecification drawing in the images above — that drawing is the only place those\ndimensions exist in both units.\u003c\/em\u003e\u003c\/p\u003e\n\n\n\n\u003ch3\u003eAlloy and water\u003c\/h3\u003e\n\u003cp\u003eMIL-DTL-18001L is a \u003cstrong\u003ezinc\u003c\/strong\u003e specification, supplied to\n\u003cstrong\u003eASTM B418 Type I\u003c\/strong\u003e — the alloyed seawater grade whose composition is\nwritten to meet MIL-A-18001K. That is why every supplier's datasheet claims to\n\"meet or exceed military specification\".\u003c\/p\u003e\n\u003cp\u003eFor \u003cstrong\u003efresh water\u003c\/strong\u003e zinc is the wrong alloy: use magnesium to\n\u003cstrong\u003eASTM B843\u003c\/strong\u003e, or zinc to \u003cstrong\u003eASTM B418 Type II\u003c\/strong\u003e, the\nhigh-purity grade for fresh and buried service. We cast to either — say which\nwater it is going into and we will quote the right one.\u003c\/p\u003e\n\n\u003ch3\u003eWhat to put on your purchase order\u003c\/h3\u003e\n\u003cp\u003eZinc anodes fail by \u003cstrong\u003epassivating\u003c\/strong\u003e: they skin over and stop\nproducing current while still looking perfectly serviceable. Iron contamination\nis the usual cause, which is exactly what ASTM B418 caps at 0.005%. Specify\n\u003cstrong\u003e\"to ASTM B418 Type I, mill certificate with each lot\"\u003c\/strong\u003e and you\nhave something to test against.\u003c\/p\u003e\n\n\u003ch3\u003eSizing\u003c\/h3\u003e\n\u003cp\u003eThe specification sets what the anode is, not how much of it you need. That\ncomes from \u003cstrong\u003eDNV-RP-B401\u003c\/strong\u003e for ships and offshore structures and\n\u003cstrong\u003eABYC E-2\u003c\/strong\u003e for boats. Whatever the calculation says,\n\u003cstrong\u003ereplace at about 50% wasted\u003c\/strong\u003e — output falls away as surface area\nis lost, so the last half protects far less than the first.\u003c\/p\u003e\n\n\u003ch3\u003eReading the type code\u003c\/h3\u003e\n\u003cp\u003eThese designations come from the military specification, not from any\nmanufacturer, which is why the same letters appear across every brand and why an\nold anode can nearly always be identified. Three letters: metal, then shape, then\ncore. \u003cstrong\u003eZ\u003c\/strong\u003e is zinc; \u003cstrong\u003eH\u003c\/strong\u003e hull slab,\n\u003cstrong\u003eS\u003c\/strong\u003e submarine slab, \u003cstrong\u003eT\u003c\/strong\u003e teardrop,\n\u003cstrong\u003eE\u003c\/strong\u003e fairwater slab, \u003cstrong\u003eR\u003c\/strong\u003e rod, \u003cstrong\u003eB\u003c\/strong\u003e bar,\n\u003cstrong\u003eD\u003c\/strong\u003e disc, \u003cstrong\u003eM\u003c\/strong\u003e mooring chain; then\n\u003cstrong\u003eS\u003c\/strong\u003e steel strap, \u003cstrong\u003eB\u003c\/strong\u003e brass straps,\n\u003cstrong\u003eC\u003c\/strong\u003e core strap, \u003cstrong\u003eP\u003c\/strong\u003e pipe core,\n\u003cstrong\u003eM\u003c\/strong\u003e interlocking core, \u003cstrong\u003eN\u003c\/strong\u003e no core.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"\/collections\/anodes\"\u003eSee every MIL-DTL-18001 type we supply →\u003c\/a\u003e\u003c\/p\u003e","brand":"Dibblee","offers":[{"title":"23 lb nominal — 9.3 kg (20.4 lb) minimum","offer_id":50199390322965,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true},{"title":"42 lb nominal — 17.7 kg (39 lb) minimum","offer_id":50199390355733,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0672\/4160\/7445\/files\/mil-zhc-23_c3f39b5f-17f3-4348-87a0-d213fd879ad4.jpg?v=1790107988"},{"product_id":"zss-anode","title":"ZSS Zinc Submarine Slab Anode","description":"\u003ch2\u003eZSS Zinc Submarine Slab Anode\u003c\/h2\u003e\n\u003cp\u003eThe submarine slab: a lower, flatter profile than the hull slab. Also supplied with an elongated stud hole where the fixing needs to take up tolerance.\u003c\/p\u003e\n\u003cp\u003eZinc sacrificial anode to \u003cstrong\u003eMIL-DTL-18001L\u003c\/strong\u003e, type\n\u003cstrong\u003eZSS\u003c\/strong\u003e — submarine slab, steel strap.\nSupplied in 2 sizes. Quoted on request.\u003c\/p\u003e\n\n\u003ch3\u003eSizes and weights\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003eMinimum weight\u003c\/th\u003e\n\u003cth\u003eSpec figure\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eZSS-12\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e12 lb nominal — 5.0 kg (11 lb) minimum\u003c\/td\u003e\n\u003ctd\u003e\n\u003cstrong\u003e5.0 kg\u003c\/strong\u003e (11 lb)\u003c\/td\u003e\n\u003ctd\u003eFig 4\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eZSS-24\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e24 lb nominal — 9.8 kg (21.5 lb) minimum\u003c\/td\u003e\n\u003ctd\u003e\n\u003cstrong\u003e9.8 kg\u003c\/strong\u003e (21.5 lb)\u003c\/td\u003e\n\u003ctd\u003eFig 5\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eThese are the \u003cstrong\u003eminimum\u003c\/strong\u003e weights set by MIL-DTL-18001L, not\nthe nominal. A ZHS-23 carries a 21.5 lb minimum, not 23 lb — the number in the\ndesignation is nominal.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFull dimensions, in inches and millimetres together, are on the\nspecification drawing in the images above — that drawing is the only place those\ndimensions exist in both units.\u003c\/em\u003e\u003c\/p\u003e\n\n\n\n\u003ch3\u003eAlloy and water\u003c\/h3\u003e\n\u003cp\u003eMIL-DTL-18001L is a \u003cstrong\u003ezinc\u003c\/strong\u003e specification, supplied to\n\u003cstrong\u003eASTM B418 Type I\u003c\/strong\u003e — the alloyed seawater grade whose composition is\nwritten to meet MIL-A-18001K. That is why every supplier's datasheet claims to\n\"meet or exceed military specification\".\u003c\/p\u003e\n\u003cp\u003eFor \u003cstrong\u003efresh water\u003c\/strong\u003e zinc is the wrong alloy: use magnesium to\n\u003cstrong\u003eASTM B843\u003c\/strong\u003e, or zinc to \u003cstrong\u003eASTM B418 Type II\u003c\/strong\u003e, the\nhigh-purity grade for fresh and buried service. We cast to either — say which\nwater it is going into and we will quote the right one.\u003c\/p\u003e\n\n\u003ch3\u003eWhat to put on your purchase order\u003c\/h3\u003e\n\u003cp\u003eZinc anodes fail by \u003cstrong\u003epassivating\u003c\/strong\u003e: they skin over and stop\nproducing current while still looking perfectly serviceable. Iron contamination\nis the usual cause, which is exactly what ASTM B418 caps at 0.005%. Specify\n\u003cstrong\u003e\"to ASTM B418 Type I, mill certificate with each lot\"\u003c\/strong\u003e and you\nhave something to test against.\u003c\/p\u003e\n\n\u003ch3\u003eSizing\u003c\/h3\u003e\n\u003cp\u003eThe specification sets what the anode is, not how much of it you need. That\ncomes from \u003cstrong\u003eDNV-RP-B401\u003c\/strong\u003e for ships and offshore structures and\n\u003cstrong\u003eABYC E-2\u003c\/strong\u003e for boats. Whatever the calculation says,\n\u003cstrong\u003ereplace at about 50% wasted\u003c\/strong\u003e — output falls away as surface area\nis lost, so the last half protects far less than the first.\u003c\/p\u003e\n\n\u003ch3\u003eReading the type code\u003c\/h3\u003e\n\u003cp\u003eThese designations come from the military specification, not from any\nmanufacturer, which is why the same letters appear across every brand and why an\nold anode can nearly always be identified. Three letters: metal, then shape, then\ncore. \u003cstrong\u003eZ\u003c\/strong\u003e is zinc; \u003cstrong\u003eH\u003c\/strong\u003e hull slab,\n\u003cstrong\u003eS\u003c\/strong\u003e submarine slab, \u003cstrong\u003eT\u003c\/strong\u003e teardrop,\n\u003cstrong\u003eE\u003c\/strong\u003e fairwater slab, \u003cstrong\u003eR\u003c\/strong\u003e rod, \u003cstrong\u003eB\u003c\/strong\u003e bar,\n\u003cstrong\u003eD\u003c\/strong\u003e disc, \u003cstrong\u003eM\u003c\/strong\u003e mooring chain; then\n\u003cstrong\u003eS\u003c\/strong\u003e steel strap, \u003cstrong\u003eB\u003c\/strong\u003e brass straps,\n\u003cstrong\u003eC\u003c\/strong\u003e core strap, \u003cstrong\u003eP\u003c\/strong\u003e pipe core,\n\u003cstrong\u003eM\u003c\/strong\u003e interlocking core, \u003cstrong\u003eN\u003c\/strong\u003e no core.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"\/collections\/anodes\"\u003eSee every MIL-DTL-18001 type we supply →\u003c\/a\u003e\u003c\/p\u003e","brand":"Dibblee","offers":[{"title":"12 lb nominal — 5.0 kg (11 lb) minimum","offer_id":50199391404309,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true},{"title":"24 lb nominal — 9.8 kg (21.5 lb) minimum","offer_id":50199391437077,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0672\/4160\/7445\/files\/mil-zss-12_689668ba-316b-478c-8b67-3eccf6a3eb47.jpg?v=1790107993"},{"product_id":"zts-anode","title":"ZTS Zinc Teardrop Anode","description":"\u003ch2\u003eZTS Zinc Teardrop Anode\u003c\/h2\u003e\n\u003cp\u003eA hydrodynamically faired teardrop, contoured to a defined set of points so it adds as little drag as possible. Used where an anode sits in the flow.\u003c\/p\u003e\n\u003cp\u003eZinc sacrificial anode to \u003cstrong\u003eMIL-DTL-18001L\u003c\/strong\u003e, type\n\u003cstrong\u003eZTS\u003c\/strong\u003e — teardrop, steel strap.\n Quoted on request.\u003c\/p\u003e\n\n\u003ch3\u003eSizes and weights\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003eMinimum weight\u003c\/th\u003e\n\u003cth\u003eSpec figure\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eZTS\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5 lb nominal — 2.3 kg (5.0 lb) minimum\u003c\/td\u003e\n\u003ctd\u003e\n\u003cstrong\u003e2.3 kg\u003c\/strong\u003e (5.0 lb)\u003c\/td\u003e\n\u003ctd\u003eFig 7\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eThese are the \u003cstrong\u003eminimum\u003c\/strong\u003e weights set by MIL-DTL-18001L, not\nthe nominal. A ZHS-23 carries a 21.5 lb minimum, not 23 lb — the number in the\ndesignation is nominal.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFull dimensions, in inches and millimetres together, are on the\nspecification drawing in the images above — that drawing is the only place those\ndimensions exist in both units.\u003c\/em\u003e\u003c\/p\u003e\n\n\n\n\u003ch3\u003eAlloy and water\u003c\/h3\u003e\n\u003cp\u003eMIL-DTL-18001L is a \u003cstrong\u003ezinc\u003c\/strong\u003e specification, supplied to\n\u003cstrong\u003eASTM B418 Type I\u003c\/strong\u003e — the alloyed seawater grade whose composition is\nwritten to meet MIL-A-18001K. That is why every supplier's datasheet claims to\n\"meet or exceed military specification\".\u003c\/p\u003e\n\u003cp\u003eFor \u003cstrong\u003efresh water\u003c\/strong\u003e zinc is the wrong alloy: use magnesium to\n\u003cstrong\u003eASTM B843\u003c\/strong\u003e, or zinc to \u003cstrong\u003eASTM B418 Type II\u003c\/strong\u003e, the\nhigh-purity grade for fresh and buried service. We cast to either — say which\nwater it is going into and we will quote the right one.\u003c\/p\u003e\n\n\u003ch3\u003eWhat to put on your purchase order\u003c\/h3\u003e\n\u003cp\u003eZinc anodes fail by \u003cstrong\u003epassivating\u003c\/strong\u003e: they skin over and stop\nproducing current while still looking perfectly serviceable. Iron contamination\nis the usual cause, which is exactly what ASTM B418 caps at 0.005%. Specify\n\u003cstrong\u003e\"to ASTM B418 Type I, mill certificate with each lot\"\u003c\/strong\u003e and you\nhave something to test against.\u003c\/p\u003e\n\n\u003ch3\u003eSizing\u003c\/h3\u003e\n\u003cp\u003eThe specification sets what the anode is, not how much of it you need. That\ncomes from \u003cstrong\u003eDNV-RP-B401\u003c\/strong\u003e for ships and offshore structures and\n\u003cstrong\u003eABYC E-2\u003c\/strong\u003e for boats. Whatever the calculation says,\n\u003cstrong\u003ereplace at about 50% wasted\u003c\/strong\u003e — output falls away as surface area\nis lost, so the last half protects far less than the first.\u003c\/p\u003e\n\n\u003ch3\u003eReading the type code\u003c\/h3\u003e\n\u003cp\u003eThese designations come from the military specification, not from any\nmanufacturer, which is why the same letters appear across every brand and why an\nold anode can nearly always be identified. Three letters: metal, then shape, then\ncore. \u003cstrong\u003eZ\u003c\/strong\u003e is zinc; \u003cstrong\u003eH\u003c\/strong\u003e hull slab,\n\u003cstrong\u003eS\u003c\/strong\u003e submarine slab, \u003cstrong\u003eT\u003c\/strong\u003e teardrop,\n\u003cstrong\u003eE\u003c\/strong\u003e fairwater slab, \u003cstrong\u003eR\u003c\/strong\u003e rod, \u003cstrong\u003eB\u003c\/strong\u003e bar,\n\u003cstrong\u003eD\u003c\/strong\u003e disc, \u003cstrong\u003eM\u003c\/strong\u003e mooring chain; then\n\u003cstrong\u003eS\u003c\/strong\u003e steel strap, \u003cstrong\u003eB\u003c\/strong\u003e brass straps,\n\u003cstrong\u003eC\u003c\/strong\u003e core strap, \u003cstrong\u003eP\u003c\/strong\u003e pipe core,\n\u003cstrong\u003eM\u003c\/strong\u003e interlocking core, \u003cstrong\u003eN\u003c\/strong\u003e no core.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"\/collections\/anodes\"\u003eSee every MIL-DTL-18001 type we supply →\u003c\/a\u003e\u003c\/p\u003e","brand":"Dibblee","offers":[{"title":"5 lb nominal — 2.3 kg (5.0 lb) minimum","offer_id":50199391502613,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0672\/4160\/7445\/files\/mil-zts_dbdf5cc6-d2c0-4340-b5f7-33700fba4676.jpg?v=1790107997"},{"product_id":"zbp-anode","title":"ZBP Zinc Bar Anode — Pipe Core","description":"\u003ch2\u003eZBP Zinc Bar Anode — Pipe Core\u003c\/h2\u003e\n\u003cp\u003eA zinc bar cast on a plain steel pipe core, lettered on the exposed face.\u003c\/p\u003e\n\u003cp\u003eZinc sacrificial anode to \u003cstrong\u003eMIL-DTL-18001L\u003c\/strong\u003e, type\n\u003cstrong\u003eZBP\u003c\/strong\u003e — bar, pipe core.\n Quoted on request.\u003c\/p\u003e\n\n\u003ch3\u003eSizes and weights\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003eMinimum weight\u003c\/th\u003e\n\u003cth\u003eSpec figure\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eZBP\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e8 lb nominal — 3.6 kg (8 lb) minimum\u003c\/td\u003e\n\u003ctd\u003e\n\u003cstrong\u003e3.6 kg\u003c\/strong\u003e (8 lb)\u003c\/td\u003e\n\u003ctd\u003eFig 21\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eThese are the \u003cstrong\u003eminimum\u003c\/strong\u003e weights set by MIL-DTL-18001L, not\nthe nominal. A ZHS-23 carries a 21.5 lb minimum, not 23 lb — the number in the\ndesignation is nominal.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFull dimensions, in inches and millimetres together, are on the\nspecification drawing in the images above — that drawing is the only place those\ndimensions exist in both units.\u003c\/em\u003e\u003c\/p\u003e\n\n\n\n\u003ch3\u003eAlloy and water\u003c\/h3\u003e\n\u003cp\u003eMIL-DTL-18001L is a \u003cstrong\u003ezinc\u003c\/strong\u003e specification, supplied to\n\u003cstrong\u003eASTM B418 Type I\u003c\/strong\u003e — the alloyed seawater grade whose composition is\nwritten to meet MIL-A-18001K. That is why every supplier's datasheet claims to\n\"meet or exceed military specification\".\u003c\/p\u003e\n\u003cp\u003eFor \u003cstrong\u003efresh water\u003c\/strong\u003e zinc is the wrong alloy: use magnesium to\n\u003cstrong\u003eASTM B843\u003c\/strong\u003e, or zinc to \u003cstrong\u003eASTM B418 Type II\u003c\/strong\u003e, the\nhigh-purity grade for fresh and buried service. We cast to either — say which\nwater it is going into and we will quote the right one.\u003c\/p\u003e\n\n\u003ch3\u003eWhat to put on your purchase order\u003c\/h3\u003e\n\u003cp\u003eZinc anodes fail by \u003cstrong\u003epassivating\u003c\/strong\u003e: they skin over and stop\nproducing current while still looking perfectly serviceable. Iron contamination\nis the usual cause, which is exactly what ASTM B418 caps at 0.005%. Specify\n\u003cstrong\u003e\"to ASTM B418 Type I, mill certificate with each lot\"\u003c\/strong\u003e and you\nhave something to test against.\u003c\/p\u003e\n\n\u003ch3\u003eSizing\u003c\/h3\u003e\n\u003cp\u003eThe specification sets what the anode is, not how much of it you need. That\ncomes from \u003cstrong\u003eDNV-RP-B401\u003c\/strong\u003e for ships and offshore structures and\n\u003cstrong\u003eABYC E-2\u003c\/strong\u003e for boats. Whatever the calculation says,\n\u003cstrong\u003ereplace at about 50% wasted\u003c\/strong\u003e — output falls away as surface area\nis lost, so the last half protects far less than the first.\u003c\/p\u003e\n\n\u003ch3\u003eReading the type code\u003c\/h3\u003e\n\u003cp\u003eThese designations come from the military specification, not from any\nmanufacturer, which is why the same letters appear across every brand and why an\nold anode can nearly always be identified. Three letters: metal, then shape, then\ncore. \u003cstrong\u003eZ\u003c\/strong\u003e is zinc; \u003cstrong\u003eH\u003c\/strong\u003e hull slab,\n\u003cstrong\u003eS\u003c\/strong\u003e submarine slab, \u003cstrong\u003eT\u003c\/strong\u003e teardrop,\n\u003cstrong\u003eE\u003c\/strong\u003e fairwater slab, \u003cstrong\u003eR\u003c\/strong\u003e rod, \u003cstrong\u003eB\u003c\/strong\u003e bar,\n\u003cstrong\u003eD\u003c\/strong\u003e disc, \u003cstrong\u003eM\u003c\/strong\u003e mooring chain; then\n\u003cstrong\u003eS\u003c\/strong\u003e steel strap, \u003cstrong\u003eB\u003c\/strong\u003e brass straps,\n\u003cstrong\u003eC\u003c\/strong\u003e core strap, \u003cstrong\u003eP\u003c\/strong\u003e pipe core,\n\u003cstrong\u003eM\u003c\/strong\u003e interlocking core, \u003cstrong\u003eN\u003c\/strong\u003e no core.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"\/collections\/anodes\"\u003eSee every MIL-DTL-18001 type we supply →\u003c\/a\u003e\u003c\/p\u003e","brand":"Dibblee","offers":[{"title":"8 lb nominal — 3.6 kg (8 lb) minimum","offer_id":50199391895829,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0672\/4160\/7445\/files\/mil-zbp_f8ff0c1b-694d-4f6a-b05e-c42b7974cac0.jpg?v=1790108009"},{"product_id":"zbs-anode","title":"ZBS Zinc Bar Anode — Steel Core","description":"\u003ch2\u003eZBS Zinc Bar Anode — Steel Core\u003c\/h2\u003e\n\u003cp\u003eThe bar anode in the steel-core form.\u003c\/p\u003e\n\u003cp\u003eZinc sacrificial anode to \u003cstrong\u003eMIL-DTL-18001L\u003c\/strong\u003e, type\n\u003cstrong\u003eZBS\u003c\/strong\u003e — bar, steel core.\n Quoted on request.\u003c\/p\u003e\n\n\u003ch3\u003eSizes and weights\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003eMinimum weight\u003c\/th\u003e\n\u003cth\u003eSpec figure\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eZBS\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e8.5 lb nominal — 3.8 kg (8.5 lb) minimum\u003c\/td\u003e\n\u003ctd\u003e\n\u003cstrong\u003e3.8 kg\u003c\/strong\u003e (8.5 lb)\u003c\/td\u003e\n\u003ctd\u003eFig 22\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eThese are the \u003cstrong\u003eminimum\u003c\/strong\u003e weights set by MIL-DTL-18001L, not\nthe nominal. A ZHS-23 carries a 21.5 lb minimum, not 23 lb — the number in the\ndesignation is nominal.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFull dimensions, in inches and millimetres together, are on the\nspecification drawing in the images above — that drawing is the only place those\ndimensions exist in both units.\u003c\/em\u003e\u003c\/p\u003e\n\n\n\n\u003ch3\u003eAlloy and water\u003c\/h3\u003e\n\u003cp\u003eMIL-DTL-18001L is a \u003cstrong\u003ezinc\u003c\/strong\u003e specification, supplied to\n\u003cstrong\u003eASTM B418 Type I\u003c\/strong\u003e — the alloyed seawater grade whose composition is\nwritten to meet MIL-A-18001K. That is why every supplier's datasheet claims to\n\"meet or exceed military specification\".\u003c\/p\u003e\n\u003cp\u003eFor \u003cstrong\u003efresh water\u003c\/strong\u003e zinc is the wrong alloy: use magnesium to\n\u003cstrong\u003eASTM B843\u003c\/strong\u003e, or zinc to \u003cstrong\u003eASTM B418 Type II\u003c\/strong\u003e, the\nhigh-purity grade for fresh and buried service. We cast to either — say which\nwater it is going into and we will quote the right one.\u003c\/p\u003e\n\n\u003ch3\u003eWhat to put on your purchase order\u003c\/h3\u003e\n\u003cp\u003eZinc anodes fail by \u003cstrong\u003epassivating\u003c\/strong\u003e: they skin over and stop\nproducing current while still looking perfectly serviceable. Iron contamination\nis the usual cause, which is exactly what ASTM B418 caps at 0.005%. Specify\n\u003cstrong\u003e\"to ASTM B418 Type I, mill certificate with each lot\"\u003c\/strong\u003e and you\nhave something to test against.\u003c\/p\u003e\n\n\u003ch3\u003eSizing\u003c\/h3\u003e\n\u003cp\u003eThe specification sets what the anode is, not how much of it you need. That\ncomes from \u003cstrong\u003eDNV-RP-B401\u003c\/strong\u003e for ships and offshore structures and\n\u003cstrong\u003eABYC E-2\u003c\/strong\u003e for boats. Whatever the calculation says,\n\u003cstrong\u003ereplace at about 50% wasted\u003c\/strong\u003e — output falls away as surface area\nis lost, so the last half protects far less than the first.\u003c\/p\u003e\n\n\u003ch3\u003eReading the type code\u003c\/h3\u003e\n\u003cp\u003eThese designations come from the military specification, not from any\nmanufacturer, which is why the same letters appear across every brand and why an\nold anode can nearly always be identified. Three letters: metal, then shape, then\ncore. \u003cstrong\u003eZ\u003c\/strong\u003e is zinc; \u003cstrong\u003eH\u003c\/strong\u003e hull slab,\n\u003cstrong\u003eS\u003c\/strong\u003e submarine slab, \u003cstrong\u003eT\u003c\/strong\u003e teardrop,\n\u003cstrong\u003eE\u003c\/strong\u003e fairwater slab, \u003cstrong\u003eR\u003c\/strong\u003e rod, \u003cstrong\u003eB\u003c\/strong\u003e bar,\n\u003cstrong\u003eD\u003c\/strong\u003e disc, \u003cstrong\u003eM\u003c\/strong\u003e mooring chain; then\n\u003cstrong\u003eS\u003c\/strong\u003e steel strap, \u003cstrong\u003eB\u003c\/strong\u003e brass straps,\n\u003cstrong\u003eC\u003c\/strong\u003e core strap, \u003cstrong\u003eP\u003c\/strong\u003e pipe core,\n\u003cstrong\u003eM\u003c\/strong\u003e interlocking core, \u003cstrong\u003eN\u003c\/strong\u003e no core.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"\/collections\/anodes\"\u003eSee every MIL-DTL-18001 type we supply →\u003c\/a\u003e\u003c\/p\u003e","brand":"Dibblee","offers":[{"title":"8.5 lb nominal — 3.8 kg (8.5 lb) minimum","offer_id":50199392026901,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0672\/4160\/7445\/files\/mil-zbs_ae72c523-cb40-41a8-ae5a-bccfbd3b47bc.jpg?v=1790108011"},{"product_id":"zrn-anode","title":"ZRN Zinc Rod Anode — No Core","description":"\u003ch2\u003eZRN Zinc Rod Anode — No Core\u003c\/h2\u003e\n\u003cp\u003eSolid extruded, drawn or rolled zinc rod with no core, sized by nominal pipe size and supplied in 36 in or 72 in lengths. Cut to suit.\u003c\/p\u003e\n\u003cp\u003eZinc sacrificial anode to \u003cstrong\u003eMIL-DTL-18001L\u003c\/strong\u003e, type\n\u003cstrong\u003eZRN\u003c\/strong\u003e — rod, no core.\nSupplied in 5 sizes. Quoted on request.\u003c\/p\u003e\n\n\u003ch3\u003eSizes\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003eSpec figure\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eZRN-1\/8\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1\/8 nominal pipe size — 10.3 mm dia\u003c\/td\u003e\n\u003ctd\u003eFig 23\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eZRN-1\/4\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1\/4 nominal pipe size — 13.7 mm dia\u003c\/td\u003e\n\u003ctd\u003eFig 23\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eZRN-3\/8\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3\/8 nominal pipe size — 17.1 mm dia\u003c\/td\u003e\n\u003ctd\u003eFig 23\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eZRN-1\/2\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1\/2 nominal pipe size — 21.3 mm dia\u003c\/td\u003e\n\u003ctd\u003eFig 23\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eZRN-3\/4\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3\/4 nominal pipe size — 26.7 mm dia\u003c\/td\u003e\n\u003ctd\u003eFig 23\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003e\u003cem\u003eFull dimensions, in inches and millimetres together, are on the\nspecification drawing in the images above — that drawing is the only place those\ndimensions exist in both units.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eZRN-1\/8: 0.18 kg\/ft (0.40 lb\/ft) · ZRN-1\/4: 0.32 kg\/ft (0.71 lb\/ft) · ZRN-3\/8: 0.50 kg\/ft (1.10 lb\/ft) · ZRN-1\/2: 0.78 kg\/ft (1.71 lb\/ft) · ZRN-3\/4: 1.21 kg\/ft (2.67 lb\/ft)\u003c\/em\u003e\u003c\/p\u003e\n\n\n\u003ch3\u003eAlloy and water\u003c\/h3\u003e\n\u003cp\u003eMIL-DTL-18001L is a \u003cstrong\u003ezinc\u003c\/strong\u003e specification, supplied to\n\u003cstrong\u003eASTM B418 Type I\u003c\/strong\u003e — the alloyed seawater grade whose composition is\nwritten to meet MIL-A-18001K. That is why every supplier's datasheet claims to\n\"meet or exceed military specification\".\u003c\/p\u003e\n\u003cp\u003eFor \u003cstrong\u003efresh water\u003c\/strong\u003e zinc is the wrong alloy: use magnesium to\n\u003cstrong\u003eASTM B843\u003c\/strong\u003e, or zinc to \u003cstrong\u003eASTM B418 Type II\u003c\/strong\u003e, the\nhigh-purity grade for fresh and buried service. We cast to either — say which\nwater it is going into and we will quote the right one.\u003c\/p\u003e\n\n\u003ch3\u003eWhat to put on your purchase order\u003c\/h3\u003e\n\u003cp\u003eZinc anodes fail by \u003cstrong\u003epassivating\u003c\/strong\u003e: they skin over and stop\nproducing current while still looking perfectly serviceable. Iron contamination\nis the usual cause, which is exactly what ASTM B418 caps at 0.005%. Specify\n\u003cstrong\u003e\"to ASTM B418 Type I, mill certificate with each lot\"\u003c\/strong\u003e and you\nhave something to test against.\u003c\/p\u003e\n\n\u003ch3\u003eSizing\u003c\/h3\u003e\n\u003cp\u003eThe specification sets what the anode is, not how much of it you need. That\ncomes from \u003cstrong\u003eDNV-RP-B401\u003c\/strong\u003e for ships and offshore structures and\n\u003cstrong\u003eABYC E-2\u003c\/strong\u003e for boats. Whatever the calculation says,\n\u003cstrong\u003ereplace at about 50% wasted\u003c\/strong\u003e — output falls away as surface area\nis lost, so the last half protects far less than the first.\u003c\/p\u003e\n\n\u003ch3\u003eReading the type code\u003c\/h3\u003e\n\u003cp\u003eThese designations come from the military specification, not from any\nmanufacturer, which is why the same letters appear across every brand and why an\nold anode can nearly always be identified. Three letters: metal, then shape, then\ncore. \u003cstrong\u003eZ\u003c\/strong\u003e is zinc; \u003cstrong\u003eH\u003c\/strong\u003e hull slab,\n\u003cstrong\u003eS\u003c\/strong\u003e submarine slab, \u003cstrong\u003eT\u003c\/strong\u003e teardrop,\n\u003cstrong\u003eE\u003c\/strong\u003e fairwater slab, \u003cstrong\u003eR\u003c\/strong\u003e rod, \u003cstrong\u003eB\u003c\/strong\u003e bar,\n\u003cstrong\u003eD\u003c\/strong\u003e disc, \u003cstrong\u003eM\u003c\/strong\u003e mooring chain; then\n\u003cstrong\u003eS\u003c\/strong\u003e steel strap, \u003cstrong\u003eB\u003c\/strong\u003e brass straps,\n\u003cstrong\u003eC\u003c\/strong\u003e core strap, \u003cstrong\u003eP\u003c\/strong\u003e pipe core,\n\u003cstrong\u003eM\u003c\/strong\u003e interlocking core, \u003cstrong\u003eN\u003c\/strong\u003e no core.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"\/collections\/anodes\"\u003eSee every MIL-DTL-18001 type we supply →\u003c\/a\u003e\u003c\/p\u003e","brand":"Dibblee","offers":[{"title":"1\/8 nominal pipe size — 10.3 mm dia","offer_id":50199393337621,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true},{"title":"1\/4 nominal pipe size — 13.7 mm dia","offer_id":50199393370389,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true},{"title":"3\/8 nominal pipe size — 17.1 mm dia","offer_id":50199393403157,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true},{"title":"1\/2 nominal pipe size — 21.3 mm dia","offer_id":50199393435925,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true},{"title":"3\/4 nominal pipe size — 26.7 mm dia","offer_id":50199393468693,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0672\/4160\/7445\/files\/mil-zrn_48f008d6-37cc-4d1a-a829-057839fbc825.jpg?v=1790108014"},{"product_id":"zdm-anode","title":"ZDM Zinc Segmented Disc Anode","description":"\u003ch2\u003eZDM Zinc Segmented Disc Anode\u003c\/h2\u003e\n\u003cp\u003eSegmented discs on an interlocking core, mounted on a support plug — class A straight thread with an O-ring seal, or class B tapered pipe thread.\u003c\/p\u003e\n\u003cp\u003eZinc sacrificial anode to \u003cstrong\u003eMIL-DTL-18001L\u003c\/strong\u003e, type\n\u003cstrong\u003eZDM\u003c\/strong\u003e — segmented disc, machine-formed interlocking core.\nSupplied in 2 sizes. Quoted on request.\u003c\/p\u003e\n\n\u003ch3\u003eSizes\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003eSpec figure\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eZDM-A\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eClass A — straight thread with O-ring seal\u003c\/td\u003e\n\u003ctd\u003eFig 24\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eZDM-B\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eClass B — tapered pipe thread\u003c\/td\u003e\n\u003ctd\u003eFig 24\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003e\u003cem\u003eFull dimensions, in inches and millimetres together, are on the\nspecification drawing in the images above — that drawing is the only place those\ndimensions exist in both units.\u003c\/em\u003e\u003c\/p\u003e\n\n\n\n\u003ch3\u003eAlloy and water\u003c\/h3\u003e\n\u003cp\u003eMIL-DTL-18001L is a \u003cstrong\u003ezinc\u003c\/strong\u003e specification, supplied to\n\u003cstrong\u003eASTM B418 Type I\u003c\/strong\u003e — the alloyed seawater grade whose composition is\nwritten to meet MIL-A-18001K. That is why every supplier's datasheet claims to\n\"meet or exceed military specification\".\u003c\/p\u003e\n\u003cp\u003eFor \u003cstrong\u003efresh water\u003c\/strong\u003e zinc is the wrong alloy: use magnesium to\n\u003cstrong\u003eASTM B843\u003c\/strong\u003e, or zinc to \u003cstrong\u003eASTM B418 Type II\u003c\/strong\u003e, the\nhigh-purity grade for fresh and buried service. We cast to either — say which\nwater it is going into and we will quote the right one.\u003c\/p\u003e\n\n\u003ch3\u003eWhat to put on your purchase order\u003c\/h3\u003e\n\u003cp\u003eZinc anodes fail by \u003cstrong\u003epassivating\u003c\/strong\u003e: they skin over and stop\nproducing current while still looking perfectly serviceable. Iron contamination\nis the usual cause, which is exactly what ASTM B418 caps at 0.005%. Specify\n\u003cstrong\u003e\"to ASTM B418 Type I, mill certificate with each lot\"\u003c\/strong\u003e and you\nhave something to test against.\u003c\/p\u003e\n\n\u003ch3\u003eSizing\u003c\/h3\u003e\n\u003cp\u003eThe specification sets what the anode is, not how much of it you need. That\ncomes from \u003cstrong\u003eDNV-RP-B401\u003c\/strong\u003e for ships and offshore structures and\n\u003cstrong\u003eABYC E-2\u003c\/strong\u003e for boats. Whatever the calculation says,\n\u003cstrong\u003ereplace at about 50% wasted\u003c\/strong\u003e — output falls away as surface area\nis lost, so the last half protects far less than the first.\u003c\/p\u003e\n\n\u003ch3\u003eReading the type code\u003c\/h3\u003e\n\u003cp\u003eThese designations come from the military specification, not from any\nmanufacturer, which is why the same letters appear across every brand and why an\nold anode can nearly always be identified. Three letters: metal, then shape, then\ncore. \u003cstrong\u003eZ\u003c\/strong\u003e is zinc; \u003cstrong\u003eH\u003c\/strong\u003e hull slab,\n\u003cstrong\u003eS\u003c\/strong\u003e submarine slab, \u003cstrong\u003eT\u003c\/strong\u003e teardrop,\n\u003cstrong\u003eE\u003c\/strong\u003e fairwater slab, \u003cstrong\u003eR\u003c\/strong\u003e rod, \u003cstrong\u003eB\u003c\/strong\u003e bar,\n\u003cstrong\u003eD\u003c\/strong\u003e disc, \u003cstrong\u003eM\u003c\/strong\u003e mooring chain; then\n\u003cstrong\u003eS\u003c\/strong\u003e steel strap, \u003cstrong\u003eB\u003c\/strong\u003e brass straps,\n\u003cstrong\u003eC\u003c\/strong\u003e core strap, \u003cstrong\u003eP\u003c\/strong\u003e pipe core,\n\u003cstrong\u003eM\u003c\/strong\u003e interlocking core, \u003cstrong\u003eN\u003c\/strong\u003e no core.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"\/collections\/anodes\"\u003eSee every MIL-DTL-18001 type we supply →\u003c\/a\u003e\u003c\/p\u003e","brand":"Dibblee","offers":[{"title":"Class A — straight thread with O-ring seal","offer_id":50199393698069,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true},{"title":"Class B — tapered pipe thread","offer_id":50199393730837,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0672\/4160\/7445\/files\/mil-zdm-assembly_7e2435f5-b5b1-4d50-bd7e-28613ed564b5.jpg?v=1790108017"},{"product_id":"zmp-anode","title":"ZMP Zinc Mooring Chain Anode","description":"\u003ch2\u003eZMP Zinc Mooring Chain Anode\u003c\/h2\u003e\n\u003cp\u003eThe mooring chain anode: zinc cast on a pipe core to clamp onto stud link chain, for grade FM3 chain from 1-1\/4 in to 4 in nominal.\u003c\/p\u003e\n\u003cp\u003eZinc sacrificial anode to \u003cstrong\u003eMIL-DTL-18001L\u003c\/strong\u003e, type\n\u003cstrong\u003eZMP\u003c\/strong\u003e — mooring chain anode, pipe core.\n Quoted on request.\u003c\/p\u003e\n\n\u003ch3\u003eSizes\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003eSpec figure\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eZMP\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSized to chain — 1-1\/4 in to 4 in nominal stud link\u003c\/td\u003e\n\u003ctd\u003eFig 28\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003e\u003cem\u003eFull dimensions, in inches and millimetres together, are on the\nspecification drawing in the images above — that drawing is the only place those\ndimensions exist in both units.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eZMP: 0.13 to 2.00 kg (0.28 to 4.41 lb) across the range\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003eFor the whole mooring\u003c\/h3\u003e\n\u003cp\u003eThe ZMP clamps onto stud link chain, so it belongs with the rest of the\nmooring. We supply the \u003ca href=\"\/collections\/mooring-chain\"\u003echain\u003c\/a\u003e and the\n\u003ca href=\"\/collections\/lr-kenter-shackles\"\u003eKenter joining shackles\u003c\/a\u003e as well —\nask and we will quote the lot together.\u003c\/p\u003e\n\n\u003ch3\u003eAlloy and water\u003c\/h3\u003e\n\u003cp\u003eMIL-DTL-18001L is a \u003cstrong\u003ezinc\u003c\/strong\u003e specification, supplied to\n\u003cstrong\u003eASTM B418 Type I\u003c\/strong\u003e — the alloyed seawater grade whose composition is\nwritten to meet MIL-A-18001K. That is why every supplier's datasheet claims to\n\"meet or exceed military specification\".\u003c\/p\u003e\n\u003cp\u003eFor \u003cstrong\u003efresh water\u003c\/strong\u003e zinc is the wrong alloy: use magnesium to\n\u003cstrong\u003eASTM B843\u003c\/strong\u003e, or zinc to \u003cstrong\u003eASTM B418 Type II\u003c\/strong\u003e, the\nhigh-purity grade for fresh and buried service. We cast to either — say which\nwater it is going into and we will quote the right one.\u003c\/p\u003e\n\n\u003ch3\u003eWhat to put on your purchase order\u003c\/h3\u003e\n\u003cp\u003eZinc anodes fail by \u003cstrong\u003epassivating\u003c\/strong\u003e: they skin over and stop\nproducing current while still looking perfectly serviceable. Iron contamination\nis the usual cause, which is exactly what ASTM B418 caps at 0.005%. Specify\n\u003cstrong\u003e\"to ASTM B418 Type I, mill certificate with each lot\"\u003c\/strong\u003e and you\nhave something to test against.\u003c\/p\u003e\n\n\u003ch3\u003eSizing\u003c\/h3\u003e\n\u003cp\u003eThe specification sets what the anode is, not how much of it you need. That\ncomes from \u003cstrong\u003eDNV-RP-B401\u003c\/strong\u003e for ships and offshore structures and\n\u003cstrong\u003eABYC E-2\u003c\/strong\u003e for boats. Whatever the calculation says,\n\u003cstrong\u003ereplace at about 50% wasted\u003c\/strong\u003e — output falls away as surface area\nis lost, so the last half protects far less than the first.\u003c\/p\u003e\n\n\u003ch3\u003eReading the type code\u003c\/h3\u003e\n\u003cp\u003eThese designations come from the military specification, not from any\nmanufacturer, which is why the same letters appear across every brand and why an\nold anode can nearly always be identified. Three letters: metal, then shape, then\ncore. \u003cstrong\u003eZ\u003c\/strong\u003e is zinc; \u003cstrong\u003eH\u003c\/strong\u003e hull slab,\n\u003cstrong\u003eS\u003c\/strong\u003e submarine slab, \u003cstrong\u003eT\u003c\/strong\u003e teardrop,\n\u003cstrong\u003eE\u003c\/strong\u003e fairwater slab, \u003cstrong\u003eR\u003c\/strong\u003e rod, \u003cstrong\u003eB\u003c\/strong\u003e bar,\n\u003cstrong\u003eD\u003c\/strong\u003e disc, \u003cstrong\u003eM\u003c\/strong\u003e mooring chain; then\n\u003cstrong\u003eS\u003c\/strong\u003e steel strap, \u003cstrong\u003eB\u003c\/strong\u003e brass straps,\n\u003cstrong\u003eC\u003c\/strong\u003e core strap, \u003cstrong\u003eP\u003c\/strong\u003e pipe core,\n\u003cstrong\u003eM\u003c\/strong\u003e interlocking core, \u003cstrong\u003eN\u003c\/strong\u003e no core.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"\/collections\/anodes\"\u003eSee every MIL-DTL-18001 type we supply →\u003c\/a\u003e\u003c\/p\u003e","brand":"Dibblee","offers":[{"title":"Sized to chain — 1-1\/4 in to 4 in nominal stud link","offer_id":50199396778261,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0672\/4160\/7445\/files\/mil-zmp_d381f2c7-5108-4f2d-88b4-80364fb6c2cd.jpg?v=1790108023"},{"product_id":"zep-a-anode","title":"ZEP Style A Zinc Fairwater Slab Anode — Square","description":"\u003ch2\u003eZEP Style A Zinc Fairwater Slab Anode — Square\u003c\/h2\u003e\n\u003cp\u003eThe square fairwater slab, 1 in thick, cast on a pipe core. Style A of the ZEP family.\u003c\/p\u003e\n\u003cp\u003eZinc sacrificial anode to \u003cstrong\u003eMIL-DTL-18001L\u003c\/strong\u003e, type\n\u003cstrong\u003eZEP-A\u003c\/strong\u003e — fairwater slab, square, pipe core.\n Quoted on request.\u003c\/p\u003e\n\n\u003ch3\u003eSizes and weights\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003eMinimum weight\u003c\/th\u003e\n\u003cth\u003eSpec figure\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eZEP-A\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStyle A — square 1 in thick — 4.1 kg (9 lb) minimum\u003c\/td\u003e\n\u003ctd\u003e\n\u003cstrong\u003e4.1 kg\u003c\/strong\u003e (9 lb)\u003c\/td\u003e\n\u003ctd\u003eFig 12\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eThese are the \u003cstrong\u003eminimum\u003c\/strong\u003e weights set by MIL-DTL-18001L, not\nthe nominal. A ZHS-23 carries a 21.5 lb minimum, not 23 lb — the number in the\ndesignation is nominal.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFull dimensions, in inches and millimetres together, are on the\nspecification drawing in the images above — that drawing is the only place those\ndimensions exist in both units.\u003c\/em\u003e\u003c\/p\u003e\n\n\n\n\u003ch3\u003eAlloy and water\u003c\/h3\u003e\n\u003cp\u003eMIL-DTL-18001L is a \u003cstrong\u003ezinc\u003c\/strong\u003e specification, supplied to\n\u003cstrong\u003eASTM B418 Type I\u003c\/strong\u003e — the alloyed seawater grade whose composition is\nwritten to meet MIL-A-18001K. That is why every supplier's datasheet claims to\n\"meet or exceed military specification\".\u003c\/p\u003e\n\u003cp\u003eFor \u003cstrong\u003efresh water\u003c\/strong\u003e zinc is the wrong alloy: use magnesium to\n\u003cstrong\u003eASTM B843\u003c\/strong\u003e, or zinc to \u003cstrong\u003eASTM B418 Type II\u003c\/strong\u003e, the\nhigh-purity grade for fresh and buried service. We cast to either — say which\nwater it is going into and we will quote the right one.\u003c\/p\u003e\n\n\u003ch3\u003eWhat to put on your purchase order\u003c\/h3\u003e\n\u003cp\u003eZinc anodes fail by \u003cstrong\u003epassivating\u003c\/strong\u003e: they skin over and stop\nproducing current while still looking perfectly serviceable. Iron contamination\nis the usual cause, which is exactly what ASTM B418 caps at 0.005%. Specify\n\u003cstrong\u003e\"to ASTM B418 Type I, mill certificate with each lot\"\u003c\/strong\u003e and you\nhave something to test against.\u003c\/p\u003e\n\n\u003ch3\u003eSizing\u003c\/h3\u003e\n\u003cp\u003eThe specification sets what the anode is, not how much of it you need. That\ncomes from \u003cstrong\u003eDNV-RP-B401\u003c\/strong\u003e for ships and offshore structures and\n\u003cstrong\u003eABYC E-2\u003c\/strong\u003e for boats. Whatever the calculation says,\n\u003cstrong\u003ereplace at about 50% wasted\u003c\/strong\u003e — output falls away as surface area\nis lost, so the last half protects far less than the first.\u003c\/p\u003e\n\n\u003ch3\u003eReading the type code\u003c\/h3\u003e\n\u003cp\u003eThese designations come from the military specification, not from any\nmanufacturer, which is why the same letters appear across every brand and why an\nold anode can nearly always be identified. Three letters: metal, then shape, then\ncore. \u003cstrong\u003eZ\u003c\/strong\u003e is zinc; \u003cstrong\u003eH\u003c\/strong\u003e hull slab,\n\u003cstrong\u003eS\u003c\/strong\u003e submarine slab, \u003cstrong\u003eT\u003c\/strong\u003e teardrop,\n\u003cstrong\u003eE\u003c\/strong\u003e fairwater slab, \u003cstrong\u003eR\u003c\/strong\u003e rod, \u003cstrong\u003eB\u003c\/strong\u003e bar,\n\u003cstrong\u003eD\u003c\/strong\u003e disc, \u003cstrong\u003eM\u003c\/strong\u003e mooring chain; then\n\u003cstrong\u003eS\u003c\/strong\u003e steel strap, \u003cstrong\u003eB\u003c\/strong\u003e brass straps,\n\u003cstrong\u003eC\u003c\/strong\u003e core strap, \u003cstrong\u003eP\u003c\/strong\u003e pipe core,\n\u003cstrong\u003eM\u003c\/strong\u003e interlocking core, \u003cstrong\u003eN\u003c\/strong\u003e no core.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"\/collections\/anodes\"\u003eSee every MIL-DTL-18001 type we supply →\u003c\/a\u003e\u003c\/p\u003e","brand":"Dibblee","offers":[{"title":"Style A — square 1 in thick — 4.1 kg (9 lb) minimum","offer_id":50199398482197,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0672\/4160\/7445\/files\/mil-zep-style-a.jpg?v=1790108176"},{"product_id":"zep-b-anode","title":"ZEP Style B Zinc Fairwater Slab Anode — Circular","description":"\u003ch2\u003eZEP Style B Zinc Fairwater Slab Anode — Circular\u003c\/h2\u003e\n\u003cp\u003eThe circular fairwater slab, 1 in thick, in seven diameters from 2 in to 11 in. Style B of the ZEP family.\u003c\/p\u003e\n\u003cp\u003eZinc sacrificial anode to \u003cstrong\u003eMIL-DTL-18001L\u003c\/strong\u003e, type\n\u003cstrong\u003eZEP-B\u003c\/strong\u003e — fairwater slab, circular, pipe core.\nSupplied in 7 sizes. Quoted on request.\u003c\/p\u003e\n\n\u003ch3\u003eSizes and weights\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003eMinimum weight\u003c\/th\u003e\n\u003cth\u003eSpec figure\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eZEP-B-2\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStyle B — 2 in diameter — 0.35 kg (0.79 lb) minimum\u003c\/td\u003e\n\u003ctd\u003e\n\u003cstrong\u003e0.35 kg\u003c\/strong\u003e (0.79 lb)\u003c\/td\u003e\n\u003ctd\u003eFig 13\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eZEP-B-3\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStyle B — 3 in diameter — 0.81 kg (1.78 lb) minimum\u003c\/td\u003e\n\u003ctd\u003e\n\u003cstrong\u003e0.81 kg\u003c\/strong\u003e (1.78 lb)\u003c\/td\u003e\n\u003ctd\u003eFig 14\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eZEP-B-4\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStyle B — 4 in diameter — 1.45 kg (3.19 lb) minimum\u003c\/td\u003e\n\u003ctd\u003e\n\u003cstrong\u003e1.45 kg\u003c\/strong\u003e (3.19 lb)\u003c\/td\u003e\n\u003ctd\u003eFig 15\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eZEP-B-5\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStyle B — 5 in diameter — 2.2 kg (4.9 lb) minimum\u003c\/td\u003e\n\u003ctd\u003e\n\u003cstrong\u003e2.2 kg\u003c\/strong\u003e (4.9 lb)\u003c\/td\u003e\n\u003ctd\u003eFig 16\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eZEP-B-6\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStyle B — 6 in diameter — 3.3 kg (7.2 lb) minimum\u003c\/td\u003e\n\u003ctd\u003e\n\u003cstrong\u003e3.3 kg\u003c\/strong\u003e (7.2 lb)\u003c\/td\u003e\n\u003ctd\u003eFig 17\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eZEP-B-9\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStyle B — 9 in diameter — 7.3 kg (16 lb) minimum\u003c\/td\u003e\n\u003ctd\u003e\n\u003cstrong\u003e7.3 kg\u003c\/strong\u003e (16 lb)\u003c\/td\u003e\n\u003ctd\u003eFig 18\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eZEP-B-11\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStyle B — 11 in diameter — 10.9 kg (24 lb) minimum\u003c\/td\u003e\n\u003ctd\u003e\n\u003cstrong\u003e10.9 kg\u003c\/strong\u003e (24 lb)\u003c\/td\u003e\n\u003ctd\u003eFig 19\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eThese are the \u003cstrong\u003eminimum\u003c\/strong\u003e weights set by MIL-DTL-18001L, not\nthe nominal. A ZHS-23 carries a 21.5 lb minimum, not 23 lb — the number in the\ndesignation is nominal.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFull dimensions, in inches and millimetres together, are on the\nspecification drawing in the images above — that drawing is the only place those\ndimensions exist in both units.\u003c\/em\u003e\u003c\/p\u003e\n\n\n\n\u003ch3\u003eAlloy and water\u003c\/h3\u003e\n\u003cp\u003eMIL-DTL-18001L is a \u003cstrong\u003ezinc\u003c\/strong\u003e specification, supplied to\n\u003cstrong\u003eASTM B418 Type I\u003c\/strong\u003e — the alloyed seawater grade whose composition is\nwritten to meet MIL-A-18001K. That is why every supplier's datasheet claims to\n\"meet or exceed military specification\".\u003c\/p\u003e\n\u003cp\u003eFor \u003cstrong\u003efresh water\u003c\/strong\u003e zinc is the wrong alloy: use magnesium to\n\u003cstrong\u003eASTM B843\u003c\/strong\u003e, or zinc to \u003cstrong\u003eASTM B418 Type II\u003c\/strong\u003e, the\nhigh-purity grade for fresh and buried service. We cast to either — say which\nwater it is going into and we will quote the right one.\u003c\/p\u003e\n\n\u003ch3\u003eWhat to put on your purchase order\u003c\/h3\u003e\n\u003cp\u003eZinc anodes fail by \u003cstrong\u003epassivating\u003c\/strong\u003e: they skin over and stop\nproducing current while still looking perfectly serviceable. Iron contamination\nis the usual cause, which is exactly what ASTM B418 caps at 0.005%. Specify\n\u003cstrong\u003e\"to ASTM B418 Type I, mill certificate with each lot\"\u003c\/strong\u003e and you\nhave something to test against.\u003c\/p\u003e\n\n\u003ch3\u003eSizing\u003c\/h3\u003e\n\u003cp\u003eThe specification sets what the anode is, not how much of it you need. That\ncomes from \u003cstrong\u003eDNV-RP-B401\u003c\/strong\u003e for ships and offshore structures and\n\u003cstrong\u003eABYC E-2\u003c\/strong\u003e for boats. Whatever the calculation says,\n\u003cstrong\u003ereplace at about 50% wasted\u003c\/strong\u003e — output falls away as surface area\nis lost, so the last half protects far less than the first.\u003c\/p\u003e\n\n\u003ch3\u003eReading the type code\u003c\/h3\u003e\n\u003cp\u003eThese designations come from the military specification, not from any\nmanufacturer, which is why the same letters appear across every brand and why an\nold anode can nearly always be identified. Three letters: metal, then shape, then\ncore. \u003cstrong\u003eZ\u003c\/strong\u003e is zinc; \u003cstrong\u003eH\u003c\/strong\u003e hull slab,\n\u003cstrong\u003eS\u003c\/strong\u003e submarine slab, \u003cstrong\u003eT\u003c\/strong\u003e teardrop,\n\u003cstrong\u003eE\u003c\/strong\u003e fairwater slab, \u003cstrong\u003eR\u003c\/strong\u003e rod, \u003cstrong\u003eB\u003c\/strong\u003e bar,\n\u003cstrong\u003eD\u003c\/strong\u003e disc, \u003cstrong\u003eM\u003c\/strong\u003e mooring chain; then\n\u003cstrong\u003eS\u003c\/strong\u003e steel strap, \u003cstrong\u003eB\u003c\/strong\u003e brass straps,\n\u003cstrong\u003eC\u003c\/strong\u003e core strap, \u003cstrong\u003eP\u003c\/strong\u003e pipe core,\n\u003cstrong\u003eM\u003c\/strong\u003e interlocking core, \u003cstrong\u003eN\u003c\/strong\u003e no core.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"\/collections\/anodes\"\u003eSee every MIL-DTL-18001 type we supply →\u003c\/a\u003e\u003c\/p\u003e","brand":"Dibblee","offers":[{"title":"Style B — 2 in diameter — 0.35 kg (0.79 lb) minimum","offer_id":50199398547733,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true},{"title":"Style B — 3 in diameter — 0.81 kg (1.78 lb) minimum","offer_id":50199398580501,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true},{"title":"Style B — 4 in diameter — 1.45 kg (3.19 lb) minimum","offer_id":50199398613269,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true},{"title":"Style B — 5 in diameter — 2.2 kg (4.9 lb) minimum","offer_id":50199398646037,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true},{"title":"Style B — 6 in diameter — 3.3 kg (7.2 lb) minimum","offer_id":50199398678805,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true},{"title":"Style B — 9 in diameter — 7.3 kg (16 lb) minimum","offer_id":50199398711573,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true},{"title":"Style B — 11 in diameter — 10.9 kg (24 lb) minimum","offer_id":50199398744341,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0672\/4160\/7445\/files\/mil-zep-b-2in.jpg?v=1790108178"},{"product_id":"zep-c-anode","title":"ZEP Style C Zinc Fairwater Slab Anode — Semi-circular","description":"\u003ch2\u003eZEP Style C Zinc Fairwater Slab Anode — Semi-circular\u003c\/h2\u003e\n\u003cp\u003eThe semi-circular fairwater slab, cast on a pipe core. Style C of the ZEP family.\u003c\/p\u003e\n\u003cp\u003eZinc sacrificial anode to \u003cstrong\u003eMIL-DTL-18001L\u003c\/strong\u003e, type\n\u003cstrong\u003eZEP-C\u003c\/strong\u003e — fairwater slab, semi-circular, pipe core.\n Quoted on request.\u003c\/p\u003e\n\n\u003ch3\u003eSizes and weights\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003eMinimum weight\u003c\/th\u003e\n\u003cth\u003eSpec figure\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eZEP-C\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStyle C — semi-circular — 10.5 kg (23 lb) minimum\u003c\/td\u003e\n\u003ctd\u003e\n\u003cstrong\u003e10.5 kg\u003c\/strong\u003e (23 lb)\u003c\/td\u003e\n\u003ctd\u003eFig 20\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eThese are the \u003cstrong\u003eminimum\u003c\/strong\u003e weights set by MIL-DTL-18001L, not\nthe nominal. A ZHS-23 carries a 21.5 lb minimum, not 23 lb — the number in the\ndesignation is nominal.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFull dimensions, in inches and millimetres together, are on the\nspecification drawing in the images above — that drawing is the only place those\ndimensions exist in both units.\u003c\/em\u003e\u003c\/p\u003e\n\n\n\n\u003ch3\u003eAlloy and water\u003c\/h3\u003e\n\u003cp\u003eMIL-DTL-18001L is a \u003cstrong\u003ezinc\u003c\/strong\u003e specification, supplied to\n\u003cstrong\u003eASTM B418 Type I\u003c\/strong\u003e — the alloyed seawater grade whose composition is\nwritten to meet MIL-A-18001K. That is why every supplier's datasheet claims to\n\"meet or exceed military specification\".\u003c\/p\u003e\n\u003cp\u003eFor \u003cstrong\u003efresh water\u003c\/strong\u003e zinc is the wrong alloy: use magnesium to\n\u003cstrong\u003eASTM B843\u003c\/strong\u003e, or zinc to \u003cstrong\u003eASTM B418 Type II\u003c\/strong\u003e, the\nhigh-purity grade for fresh and buried service. We cast to either — say which\nwater it is going into and we will quote the right one.\u003c\/p\u003e\n\n\u003ch3\u003eWhat to put on your purchase order\u003c\/h3\u003e\n\u003cp\u003eZinc anodes fail by \u003cstrong\u003epassivating\u003c\/strong\u003e: they skin over and stop\nproducing current while still looking perfectly serviceable. Iron contamination\nis the usual cause, which is exactly what ASTM B418 caps at 0.005%. Specify\n\u003cstrong\u003e\"to ASTM B418 Type I, mill certificate with each lot\"\u003c\/strong\u003e and you\nhave something to test against.\u003c\/p\u003e\n\n\u003ch3\u003eSizing\u003c\/h3\u003e\n\u003cp\u003eThe specification sets what the anode is, not how much of it you need. That\ncomes from \u003cstrong\u003eDNV-RP-B401\u003c\/strong\u003e for ships and offshore structures and\n\u003cstrong\u003eABYC E-2\u003c\/strong\u003e for boats. Whatever the calculation says,\n\u003cstrong\u003ereplace at about 50% wasted\u003c\/strong\u003e — output falls away as surface area\nis lost, so the last half protects far less than the first.\u003c\/p\u003e\n\n\u003ch3\u003eReading the type code\u003c\/h3\u003e\n\u003cp\u003eThese designations come from the military specification, not from any\nmanufacturer, which is why the same letters appear across every brand and why an\nold anode can nearly always be identified. Three letters: metal, then shape, then\ncore. \u003cstrong\u003eZ\u003c\/strong\u003e is zinc; \u003cstrong\u003eH\u003c\/strong\u003e hull slab,\n\u003cstrong\u003eS\u003c\/strong\u003e submarine slab, \u003cstrong\u003eT\u003c\/strong\u003e teardrop,\n\u003cstrong\u003eE\u003c\/strong\u003e fairwater slab, \u003cstrong\u003eR\u003c\/strong\u003e rod, \u003cstrong\u003eB\u003c\/strong\u003e bar,\n\u003cstrong\u003eD\u003c\/strong\u003e disc, \u003cstrong\u003eM\u003c\/strong\u003e mooring chain; then\n\u003cstrong\u003eS\u003c\/strong\u003e steel strap, \u003cstrong\u003eB\u003c\/strong\u003e brass straps,\n\u003cstrong\u003eC\u003c\/strong\u003e core strap, \u003cstrong\u003eP\u003c\/strong\u003e pipe core,\n\u003cstrong\u003eM\u003c\/strong\u003e interlocking core, \u003cstrong\u003eN\u003c\/strong\u003e no core.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"\/collections\/anodes\"\u003eSee every MIL-DTL-18001 type we supply →\u003c\/a\u003e\u003c\/p\u003e","brand":"Dibblee","offers":[{"title":"Style C — semi-circular — 10.5 kg (23 lb) minimum","offer_id":50199398875413,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0672\/4160\/7445\/files\/mil-zep-style-c.jpg?v=1790108186"}],"url":"https:\/\/www.kentershackle.com\/collections\/saltwater-anodes.oembed","provider":"Kenter Shackles","version":"1.0","type":"link"}